RWM50U: How to Set Up & Use

Introduction

The Rockville RWM50U Wireless UHF Microphone System is a high-quality, long-range microphone system designed for live performances, DJ setups, karaoke, and more. It provides clear audio transmission and eliminates the need for wires, allowing free movement while using the microphone.

This guide will walk you through:

• Setting up the receiver and microphone
• Connecting to a powered speaker
• Connecting to a mixer for additional audio control

What’s Included

• RWM50U Receiver
• Wireless Handheld Microphone
• 2 Batteries for the Microphone
• Antenna (for better signal reception)
• Quarter-Inch Cable (for speaker/mixer connection)
• Power Cable (for receiver)

Step 1: Setting Up the Receiver

1. Screw the antenna onto the back of the receiver.
2. Plug in the power cable to the receiver and connect it to a power source.
3. Turn on the receiver using the power switch.

Step 2: Setting Up the Wireless Microphone

1. Unscrew the bottom cap of the microphone to access the battery compartment.
2. Insert the included batteries into the microphone.
3. Screw the bottom cap back on.
4. Turn on the microphone to sync it with the receiver.

Step 3: Connecting to a Powered Speaker

For a direct connection to a powered speaker, follow these steps:

1. Use the included quarter-inch cable:
   • One end → Quarter-inch mix output on the receiver.
   • Other end → Quarter-inch input on the speaker (e.g., Channel 1).

Alternatively, you can use an XLR cable:

• One end → Balanced XLR output on the receiver.
• Other end → XLR input on the speaker.

2. Turn on the powered speaker.
3. Raise the volume knob on the receiver.
4. Increase the volume on the speaker.
5. Turn on the microphone and test the sound.

Step 4: Understanding the Microphone Mute Function

• The power switch on the microphone has three positions:
  • Up → Microphone is on.
  • Middle → Microphone is muted.
  • Down → Microphone is off.
• When muted, no sound will be transmitted to the speaker.

Step 5: Wireless Range and Performance

• Indoor Range: 300-400 feet.
• Outdoor Range: 250-350 feet.
• Ensure clear line of sight between the microphone and receiver for best performance.

Step 6: Connecting to a Mixer for More Control

For more audio customization, you can connect the receiver to a mixer.

Using a Quarter-Inch Cable

1. One end → Quarter-inch mix output on the receiver.
2. Other end → Quarter-inch input on the mixer (Channel 1).

Using an XLR Cable

1. One end → Balanced XLR output on the receiver.
2. Other end → XLR input on the mixer (Channel 1).

Powering On & Adjusting Volume

1. Turn on the mixer.
2. Turn on the receiver.
3. Increase the volume knob on the receiver.
4. Raise the gain and volume fader on the mixer.
5. Raise the main left and right faders to hear the microphone through the speakers.

With the mixer, you can:

• Use EQ adjustments to shape your sound.
• Apply built-in effects to enhance vocals.
• Control multiple audio sources alongside the microphone.

Conclusion

The Rockville RWM50U Wireless UHF Microphone System is easy to set up and provides crystal-clear audio for performances, DJ events, karaoke, and more. Whether using it directly with a speaker or through a mixer for advanced control, this guide ensures a smooth and reliable setup.