RPG8BT V2: How to Set Up & Use

Introduction

The Rockville RPG8BT V2 8-Inch Powered PA Speakers are perfect for live performances, band rehearsals, conferences, houses of worship, karaoke, and more. These speakers are portable, versatile, and offer excellent sound quality, whether you're using them as monitors, placing them on a table, or mounting them on a stand. In this guide, we’ll walk you through the steps to set up your RPG8BT V2 speakers, including how to connect your devices and use the wireless features.

What You’ll Need

• RPG8BT V2 8-Inch Powered PA Speakers
• Power cable (included)
• Wireless remote control (included)
• Microphone (optional)
• Speaker stand (optional)
• XLR and RCA cables (optional, for additional gear)

Step-by-Step Instructions

1. Mount the Speaker on a Stand (Optional)

• Set Up the Speaker Stand: Loosen the locking knob on your standard speaker stand to allow the speaker to slide onto the stand.
• Secure the Speaker: Once the speaker is in place, tighten the locking knob to secure the speaker.

2. Power the Speaker

• Plug in the Power Cable: Take the female end of the included power cable and plug it into the back of the speaker. Plug the other end into a power outlet.
• Set the Voltage: Adjust the voltage setting on the back of the speaker to match your country’s power supply (110V for the US, 220V for other countries).
• Turn On the Speaker: Flip the power switch to turn on the speaker.

3. Set Up the Microphone

• Connect the Microphone: To use a microphone, plug a female XLR to quarter-inch cable into the microphone and the quarter-inch mic input on the speaker.
• Adjust the Microphone Volume: Set the mic level on the speaker to the lowest setting to avoid feedback. Slowly raise the mic volume to a comfortable level.
• Test the Microphone: Turn on the microphone, and you should hear your voice coming from the speaker.

4. Adjust the Sound with the Two-Band EQ

• Treble Adjustment: Use the treble knob to adjust the high frequencies of your voice or music. Turning it up will make the high frequencies more prominent, while turning it down will reduce them.
• Bass Adjustment: Use the bass knob to adjust the low frequencies. Turning it up will add more bass to the sound, and turning it down will reduce it.

5. Connect Additional Audio Sources

• Line-In via XLR: Use the XLR input on the back of the speaker to connect devices with a line-level output, such as a keyboard or another speaker.
• Line-In via RCA: For devices like a record player or a smartphone, use the RCA inputs on the back of the speaker.
• Adjust Line Input Levels: Use the line level knob to control the volume of line-level devices.

6. Set Up True Wireless Stereo (TWS) Mode

• Put Both Speakers into Bluetooth Mode: Press the mode button until the speaker is set to Bluetooth mode.
• Activate TWS Connection: On the first speaker, press and hold the TWS button for about three seconds. Both speakers will beep when they are connected, and the TWS indicator will show "Link" on both displays.
• Pair with Your Device: Once the speakers are connected, go into your phone’s Bluetooth settings, search for “Rockville” and select it to pair.
• Adjust the MP3 Volume: Raise the MP3 level knob to hear music coming from both speakers.

7. Connect via USB/SD Card

• Insert USB/SD Card: Plug in a USB drive or SD card into the speaker to play music.
• Set the Input Mode: Set the input mode to USB or SD to hear the music.

8. Connect a Passive Mixer (Optional)

• Set Up the Mixer: If using a passive mixer, connect it to the speakers using XLR cables. Plug the female ends into the main outputs of the mixer and the male ends into the XLR line inputs on the speakers.
• Adjust the Mixer Settings: Raise the gain and volume knobs on your mixer to send the signal to the speakers.
• Monitor the Sound: You should hear the sound through both speakers.

9. Monitor Peak Levels

• Limit LED Light: If the limit LED light on the back of the speaker lights up, it indicates that the speaker is reaching peak volume. Adjust the levels to prevent distortion.

10. Control Features via Remote

• Use the included wireless remote to control:
  • Volume, Bass, Treble: Adjust these settings remotely.
  • Input Selection: Switch between inputs like Bluetooth, USB, or RCA.
  • Playback Controls: Pause, play, skip, or repeat tracks.

Conclusion

The Rockville RPG8BT V2 8-Inch Powered PA Speakers are now set up and ready for use. Whether you’re performing live, hosting a karaoke session, or giving a speech, these speakers provide great sound and flexibility for any event. The wireless stereo capabilities, multiple input options, and remote control make them easy to use in any setup.