RPB-XL: How To Set Up & Use

Introduction:
This guide will walk you through how to set up your Rockville RPB XL portable Bluetooth speaker, whether you own the black or camo version. You'll also learn how to pair two RPB XLs together using TWS (True Wireless Stereo) for a full stereo sound experience. The steps are simple and beginner-friendly.
Requirements:

• Rockville RPB XL speaker (black or camo)
• Included USB-C charging cable
• Included 3.5mm aux cable (optional for wired audio source)
• Bluetooth-enabled device (e.g., smartphone or tablet)

Step-by-Step Instructions

1. Charging the RPB XL

• Use the included USB-C charging cable.
• Plug the USB-C end into the “Charging” port labeled on the unit.
• Plug the other end into a USB port on your computer or a wall adapter.

2. Using the Aux Input (Optional)

• Use the included 3.5mm aux cable to connect to the AUX input on the back of the unit.
• Ideal for devices with a headphone jack (e.g., laptops, iPads).

3. Playing Music from USB or SD Card

• Insert a USB thumb drive or SD card into the respective slots on the back.
• The speaker will play supported audio files directly from the storage device.

4. Using the Built-in Power Bank

• Connect your phone’s USB cable to the “Power Bank” USB-A port on the speaker.
• Great for charging your phone on the go using the RPB XL’s 4000mAh battery.

5. Checking Battery Life

• Tap the power button once (do not hold) to check battery level.
• LED indicators will light up (5 bars = full, 1 bar = low battery).

6. Connecting to Bluetooth

• Turn on the RPB XL by holding the power button until it says “Pairing.”
• On your phone or tablet, go to Bluetooth settings and select RPB XL.
• You’ll hear a chime once connected.
• The speaker will remember your device for future use.

7. Pairing Two RPB XL Speakers via TWS (True Wireless Stereo)

1. Disconnect Current Bluetooth Connection:
   • On your phone, go to Bluetooth settings and tap Forget This Device for RPB XL.
2. Power On Both RPB XL Units:
   • Turn on both speakers. They will enter pairing mode automatically.
3. Allow TWS to Connect:
   • Wait until you hear a chime indicating both speakers have paired to each other.
   • LED Indicator Note:
     • Flashing blue = Main unit
     • Solid blue = Slave unit
4. Reconnect Your Phone:
   • Go back to your phone’s Bluetooth settings.
   • Select RPB XL again.
   • You’ll hear a chime confirming Bluetooth is connected in TWS mode.
5. Enjoy Stereo Sound:
   • Music will now play in true stereo with left and right channels split between the two speakers.

Troubleshooting & FAQs

Q: One speaker isn’t connecting in TWS. What should I do?

• Ensure both speakers are in pairing mode.
• Power cycle both units and repeat the TWS pairing steps.

Q: How do I know which speaker is the main and which is the slave?

• The flashing blue light = Main unit
• The solid blue light = Slave unit

Q: How do I check the battery level?

• Tap the power button once quickly to display the battery level LEDs.

Q: Can I use the speaker while charging?

• Yes, the speaker can be used while plugged in.

Q: Will both speakers power off at once in TWS?

• Yes, turning off the main speaker will also turn off the slave speaker.

Conclusion:
Setting up your Rockville RPB XL and using its features like Bluetooth pairing, TWS stereo connection, and built-in power bank is quick and easy. This speaker is designed to deliver great sound whether you're using one or two units together.