SLIM SHAKER 10: How To Set Up Home Theater Powered Subwoofer

Introduction: In this guide, we'll walk you through the process of setting up the Rockville Slim Shaker 10 subwoofer. The setup includes options for wall mounting, placing it under your couch, or setting it up in a vertical position. Whether you want to enhance your home theater experience or just add some deep bass to your setup, we’ll cover everything you need to know.

Step-by-Step Instructions:

1. Unboxing the Slim Shaker 10

• The kit includes:
  • The Slim Shaker 10 subwoofer
  • Manual for instructions
  • Banana cable adapter for connection
  • Hardware for wall mounting, including:
    • Mounting template
    • Brackets
    • Screws
    • EVA foam pieces for cushioning

2. Positioning the Subwoofer

• You have several options for positioning the Slim Shaker 10:
  • Vertical Position: Place the subwoofer standing up. You can place it horizontally or upright. For better stability, add EVA foam pads to the base.
  • Under Couch Position: Use the included feet on the front of the sub or remove them if space is limited. Attach EVA foam pads on the back for an upfiring setup beneath your couch.
  • Wall Mounting: Mount the subwoofer on a wall using the provided hardware.

3. Wall Mounting the Subwoofer

• Before mounting, check for wall studs using a stud finder. If studs are present, you can use screws. Otherwise, use anchors for extra security.
• Using the mounting template:
  • Position the template on the wall where you want to mount the sub.
  • Use a pen or pencil to mark the drilling points through the punched-out holes in the template.
  • Attach the brackets to the wall using screws.
  • After all brackets are secured, hang the subwoofer by aligning the hooks with the brackets (like hanging a picture).

4. Controls, Inputs, and Functions

• Power LED Indicator: Shows the subwoofer is powered on and operational.
• RCA Input: Connects the subwoofer to your home theater receiver or interface.
• Volume Knob: Controls the overall volume of the subwoofer.
• Frequency Knob (Low Pass Filter): Adjusts the frequency range coming from the subwoofer. Set to 100 Hz to allow frequencies below that to pass through.
• Phase Switch: Adjusts the phase of the subwoofer between 0° or 180° to sync it with the rest of your setup.
• Power Mode Switch:
  • Auto Mode: The sub activates only when receiving a signal and turns off after 15 minutes of inactivity.
  • On Mode: Keeps the subwoofer powered at all times.
  • Off Mode: The subwoofer is powered off.

5. Connecting the Subwoofer to Your Receiver

• Locate the sub output on your receiver (often labeled sub out).
• Use an RCA cable to connect the subwoofer to the receiver.
• Adjust the volume and set the frequency of the subwoofer for optimal bass output.
• Any audio connected to the receiver will now play through the main speakers and the subwoofer.

6. Testing the Setup

• Without the Subwoofer: Play a sample track to hear how it sounds without the subwoofer.
• With the Subwoofer: Now, turn on the Slim Shaker 10 and play the same track to experience the difference. The subwoofer will add deep bass and enhance the overall audio clarity.

Conclusion:

Setting up your Slim Shaker 10 is easy, whether you choose to wall-mount it, place it under the couch, or stand it vertically. The subwoofer's powerful bass will improve your home theater or music experience significantly.