SLIM SHAKER 10: Controls, Inputs & Functions

Introduction

The Rockville Slim Shaker 10 is a compact powered subwoofer designed for home theater and music applications. This guide walks you through the controls, inputs, and functions of the subwoofer to help you get the most out of your setup.

Front Panel Controls & Inputs

1. Power LED Indicator

• Glows when the sub is powered on and working.
• Helps confirm proper functionality.

2. RCA Input

• Connects the subwoofer to a home theater receiver, audio interface, or other audio sources.
• Use an RCA cable to link your receiver’s Sub Out or LFE output to the Slim Shaker 10’s RCA input.

3. Volume Knob

• Adjusts the overall loudness of the subwoofer.
• Start at a moderate level and increase as needed.

4. Frequency Knob (Low Pass Filter - LPF)

• Controls the frequency range that the subwoofer will reproduce.
• Example setting:
  • If set to 100 Hz, the sub will only play frequencies 100 Hz and below.
  • Everything above 100 Hz is filtered out, keeping the bass clean.

5. Phase Switch (0° / 180°)

• Adjusts the phase of the subwoofer to match the rest of your speakers.
• If the bass feels weak or out of sync, flip the switch to 180° and test if it improves the sound.

6. Power Mode Switch

• Auto Mode (Middle Position):
  • The subwoofer turns on automatically when receiving an audio signal.
  • If no signal is detected for 15 minutes, it automatically turns off to save power.
• On Mode (Right Position):
  • The subwoofer stays powered on at all times.
• Off Mode (Left Position):
  • The subwoofer is completely powered off.

Conclusion

The Rockville Slim Shaker 10 provides easy-to-use controls and flexible settings to enhance your home theater or music setup. With adjustable volume, frequency, and power settings, you can fine-tune the subwoofer for the best bass experience.