CART-SHELF: How To Set Up w/ Rock Cart Pro

Introduction

The Rockville CART-Shelf provides additional storage space on top of your cart, making it easier to transport gear securely. This guide will walk you through installation and usage.

✅ Capacity: Supports up to 150 pounds of gear.

Step 1: Understanding the Shelf Components

The CART-SHF includes:

• Longer panel – Used when the cart is in the condensed position.
• Shorter panel – Added when the cart is fully extended.
• Four butterfly screws – Used to secure the shelf to the cart handles.

Step 2: Installing the First Shelf Panel (Condensed Cart)

1. Line up the hooks on the ends of the longer panel with the holes on the cart handles.
2. Loosen the bottom of the butterfly screws and remove them.
3. Feed the screws through the holes in the cart handles.
4. Reattach and tighten the butterfly screws to secure the shelf.

Once attached, you can place gear on top of the shelf while the cart is in its condensed position.

Step 3: Adding the Second Panel (Extended Cart)

1. Loosen the screw knobs on the first panel and remove the hook at the end.
2. Take the shorter shelf panel and slide its rails through the holes on the first shelf.
3. Reattach and tighten the screw knobs to connect both shelves together.
4. Line up the hooks of the extended shelf to the cart handle holes.
5. Secure the shelf with the butterfly screws, just like the first panel.

Step 4: Loading Your Gear

• Once installed, the shelf creates a secure storage space on top of the cart.
• The 150 lb weight capacity ensures safe transport of heavy equipment.

✅ Tip: Use the shelf to carry additional gear, keeping the bottom of your cart free for bulkier items.

Conclusion

The Rockville CART-Shelf is a versatile accessory that enhances your cart’s storage and transport capabilities.