RVLS60: How To Mount Lights

Introduction

The Rockville RVLS60 Lighting Stand provides a sturdy and adjustable setup for mounting PAR lights, wedge lights, and other fixtures. This guide walks you through attaching lights to the T-bar, securing them properly, and making height adjustments.

Step 1: Attaching the T-Bar to the Stand

1. Loosen the knob on the bottom of the T-bar.
2. Align the hole on the bottom of the T-bar with the top of the stand.
3. Slide the T-bar onto the stand’s top pole.
4. Tighten the knob securely to ensure stability.

Step 2: Mounting PAR Lights

1. Identify the mounting holes on the top and bottom of the T-bar.
2. Gather the included hardware (bolts, washers, and wing nuts).
3. Remove the wing nut and one washer from a bolt.
4. Insert the bolt (with one washer attached) through a hole in the T-bar.
5. Place the second washer on top of the light’s bracket (to prevent scratches).
6. Align the bracket’s hole with the bolt and secure it using the wing nut.
7. Tighten the wing nut completely to hold the light in place.
8. Repeat these steps for additional PAR lights.

Step 3: Mounting Wedge Lights (Bracket less Setup)

1. Remove the wing nut from a bolt (it won’t be needed).
2. Remove one washer and insert the bolt into a T-bar hole.
3. Place the second washer on the bottom of the bolt for protection.
4. Align one of the wedge light’s screw holes with the bolt.
5. Screw the wedge light onto the bolt by rotating it until secure.
6. Use a wrench if necessary to tighten the bolt while mounting.
7. Repeat for additional wedge lights.

Step 4: Adjusting the Stand Height

1. Loosen the height adjustment knobs on the stand.
2. Raise the pole to the desired height.
3. Insert the safety pin into the nearest hole to lock the height.
4. Lower the stand slightly so the pin catches.
5. Tighten the height adjustment knob to secure it.

Conclusion

Mounting PAR lights or wedge lights onto the Rockville RVLS60 is a simple and efficient process. With its adjustable height and secure mounting options, this stand ensures a professional and stable lighting setup for any event, gig, or stage performance.