HTS45: How To Set Up Rockville 5.1 Home Theater Surround Sound System

Introduction

This guide will walk you through the setup of the Rockville HTS45 5.1 Channel Home Theater System. With five satellite speakers and a subwoofer, this system delivers a true surround sound experience for movies, music, and gaming. Follow these steps to easily connect your speakers and optimize your setup.

What’s Included:

• Subwoofer unit (main control unit)
• Five interchangeable satellite speakers (front, center, and rear)
• Power cable (attached to the subwoofer)
• Three RCA cables (for 5.1 surround input from DVD/Blu-ray players)
• FM antenna
• Remote control

Step-by-Step Setup Instructions

1. Connecting the Satellite Speakers

1. Locate the audio output section on the back of the subwoofer unit.
2. Plug in each speaker’s RCA cable to the corresponding labeled ports:
   • CEN – Center speaker
   • FR – Front Right speaker
   • FL – Front Left speaker
   • SR – Side Right (Rear) speaker
   • SL – Side Left (Rear) speaker
3. Placement Tip:
   • Front Left & Right – Place on each side of your TV.
   • Center Speaker – Place directly below or above the TV.
   • Rear Left & Right – Place on the side or behind your seating area for surround effects.

Mounting Option: Each satellite speaker has a built-in mount for easy wall installation. Simply drill a screw into the wall and hang the speaker on it.

2. Powering the System

1. Plug the attached power cable into a wall outlet.
2. Flip the power switch (on the back of the subwoofer) to the ON position.
3. The LED display on the front panel will light up, indicating the system is powered on.

3. Adjusting Speaker Volume Levels

1. Use the jog wheel on the front panel to control the system.
2. Press the jog wheel to cycle through:
   • Front Left Volume
   • Front Right Volume
   • Side Left Volume
   • Side Right Volume
   • Center Speaker Volume
   • Master Volume
3. You can also fine-tune speaker levels using the remote control.

4. Connecting Audio Sources

The HTS45 offers multiple ways to connect your devices:

Option 1: Optical Input (Recommended for Modern TVs)

1. Connect an optical cable from your TV to the OPTICAL port on the subwoofer.
2. Adjust your TV’s audio settings:
   • Set the TV speakers to OFF.
   • Select PCM mode in the audio output settings.

Troubleshooting: If there is no sound, ensure your TV audio output is set to PCM mode.

Option 2: RCA Stereo Input (DVD/Blu-ray Players, Older TVs, Game Consoles)

1. Use the included RCA cables to connect your device’s stereo output to the DVD RCA input on the back of the subwoofer.
2. Select DVD mode on the remote.

Option 3: 5.1 RCA Inputs (For True Surround Sound from DVD/Blu-ray Players)

1. Use the included three RCA cables to connect all six channels (Front Left, Front Right, Center, Subwoofer, Rear Left, Rear Right) to the subwoofer.
2. Select 5.1 mode on the remote.

Option 4: Bluetooth Connection (For Wireless Music Playback)

1. Set the system to Bluetooth mode using the remote.
2. On your smartphone or tablet, select "HTS45" from the Bluetooth device list.
3. You will hear a confirmation chime when connected.

Option 5: USB & SD Card Playback

• Insert a USB drive or SD card with music files into the corresponding port.
• The system will automatically play stored files.

Option 6: FM Radio Mode

1. Connect the included FM antenna to the FM port.
2. Use the remote to scan for radio stations.

5. Using a Microphone for Karaoke

The HTS45 has two 1/4" microphone inputs for karaoke or announcements.

1. Plug a microphone with a 1/4" cable into either MIC 1 or MIC 2 input on the side of the subwoofer.
2. Adjust the microphone volume using the dedicated knob.
3. Use the echo knob to add effects.
4. Play karaoke tracks via Bluetooth, USB, or an AUX input, and sing along through the 5.1 surround system.

Troubleshooting & FAQs

Q: Why isn’t my TV producing sound through the HTS45?

• Check if the audio cable is properly connected.
• Set TV audio to PCM mode (for optical connections).
• Make sure the TV speakers are turned off in the settings.

Q: Can I adjust the volume of each speaker individually?

• Yes! Use the jog wheel on the front panel or the remote control to adjust each speaker’s volume.

Q: How do I switch between inputs?

• Use the remote control or the jog wheel to cycle through inputs (Bluetooth, Optical, RCA, USB, FM, 5.1).

Q: My Bluetooth device isn’t connecting. What should I do?

• Ensure the system is in Bluetooth mode.
• Make sure your device is within range (30 feet).
• Restart Bluetooth on your device and try reconnecting.

Q: How can I mount the speakers to the wall?

• Each satellite speaker has a built-in mounting slot.
• Simply drill a screw into the wall and hang the speaker.

Conclusion

Setting up the Rockville HTS45 5.1 Channel Home Theater System is quick and easy. With multiple input options, Bluetooth streaming, FM radio, and karaoke functionality, this system delivers an immersive surround sound experience for your home entertainment.