Introduction
The Cart Wag is a great accessory that allows you to carry larger items securely and keep them enclosed while using your Rock Cart Offroad. In this guide, we’ll walk you through the steps to set up the Cart Wag, expand your cart, and use it to transport larger gear.
Step-by-Step Instructions
Step 1: Expanding the Cart
- Loosen the Knobs:
- Start by loosening the knobs on the bottom of the cart.
- Pull the Cart Out:
- After the knobs are loosened, pull each side of the cart outward until you hear a clicking sound. This indicates that the cart is fully expanded.
- Tighten the Knobs:
- Once fully expanded, tighten the knobs to lock the cart in place.
- You may also want to engage the cart brakes to keep it steady while you’re setting up the Cart Wag.
Step 2: Attaching the Cart Wag
- Slide the Bag onto the Cart Handles:
- Take each end of the Cart Wag bag and locate the openings on each side.
- Start by sliding the front end of the bag through the front handle, just a little bit.
- Repeat the same for the other end, sliding it onto the other handle.
- Align the Bag:
- Once both ends are on the handles, pull the bag all the way down so it’s fully settled and securely attached to the cart.
Step 3: Securing the Bag
- Use the Buckles:
- Open the buckles to access the bag, and place your gear inside.
- You can store items like speakers, speaker stands, lighting trees, etc.
- Close the Bag:
- Once you’ve placed your items inside, buckle the straps back up and pull on the straps to securely close the bag.
Step 4: Removing the Cart Wag
- Unbuckle the Bag:
- To remove the Cart Wag, simply undo the buckles and lift up on each side of the bag.
- Fold the Bag:
- Fold the bag up and remove it from the cart. You can then return the cart to its normal size or leave it expanded, depending on your needs.
Conclusion
Setting up the Cart Wag to your Rock Cart Offroad is quick and easy. By following these simple steps, you can securely transport larger items with ease.
Comments
0 comments
Article is closed for comments.