ROCKSHIELD 3: How To Set Up & Use

Introduction

The Rockville RockShield 3 is a studio vocal isolation shield designed to reduce unwanted noise and reflections, making it perfect for podcasts, home studios, Twitch streaming, voiceovers, and professional recordings. This guide will walk you through two setup options:

1. Desktop Setup – Ideal for use on a table or desk.
2. Standing Setup – Mounting the shield on a microphone or PA speaker stand.

Follow these step-by-step instructions to get your RockShield 3 up and running quickly.

What’s Included

Before starting, make sure you have all the parts included with your RockShield 3:

• RockShield 3 Isolation Shield (metal backing with sound-absorbing foam)
• Microphone Mounting Bracket
• Metal Arm for Mounting a Microphone
• Washer and Screw Adapter
• Three Metal Feet (for desktop setup)
• Large Mounting Bracket (for standing setup)

Desktop Setup

This setup is perfect for recording at a desk or table.

Step 1: Attach the Metal Feet

1. Locate the three screw holes at the bottom of the RockShield 3.
2. Screw in two of the metal feet into the left and right holes, leaving the middle hole empty for now.

Step 2: Attach the Microphone Mounting Bracket

1. Place the microphone mounting bracket over the middle hole.
2. Insert the third metal foot through the bracket’s hole and screw it into the middle hole.
3. Tighten all screws to ensure stability.

Step 3: Attach the Microphone Arm

1. Insert the metal arm into the small hole on the mounting bracket.
2. Secure it by inserting the screw and tightening it.

Step 4: Mount Your Microphone

1. If your microphone has a small mounting hole, you can screw it directly onto the arm.
2. If your microphone requires a shock mount (e.g., Rockville RCM Pro), use the washer and screw adapter before attaching the shock mount.
3. Insert your microphone into the shock mount.

Step 5: Attach a Pop Filter (Recommended)

1. Attach the RockPop filter to the microphone arm by clamping it on.
2. Position the filter in front of the microphone.

Step 6: Connect Your Microphone

• Plug a microphone cable into the microphone and connect it to your audio interface.

Your desktop setup is now complete! This setup is great for streaming, podcasts, and home recording.

Standing Setup

This setup allows you to use the RockShield 3 while standing, making it ideal for professional vocal recording and voiceovers.

Step 1: Attach the Metal Feet

1. Screw in the two outer metal feet (left and right) like in the desktop setup.

Step 2: Install the Mounting Bracket

1. Locate the five knobs on the back of the shield and unscrew the middle one.
2. Align the large mounting bracket with the top and bottom holes.
3. Reinsert the screw to secure the bracket.

Step 3: Secure the Mounting Bracket

1. Place the third metal foot over the bracket to help secure it in place.
2. Tighten all screws to ensure stability.

Step 4: Mount the RockShield 3 on a Stand

1. Loosen the clamp screws on the mounting bracket.
2. Position the RockShield 3 onto a microphone stand or PA speaker stand.
3. Tighten the screws until the shield is firmly secured.

Step 5: Attach the Microphone

1. Insert the metal arm into the bracket and secure it with a screw.
2. Attach the microphone shock mount or screw the microphone directly onto the arm.
3. Place the microphone into the shock mount.

Step 6: Attach a Pop Filter (Recommended)

• Clamp the pop filter onto the microphone arm and position it in front of the microphone.

Step 7: Connect Your Microphone

• Plug a microphone cable into the microphone and connect it to your audio interface.

Your standing setup is now complete! This configuration provides superior noise isolation for professional vocal recording.

Conclusion

The Rockville RockShield 3 is a versatile vocal isolation shield that can be used in both desktop and standing configurations. Whether you're recording voiceovers, streaming, or tracking vocals in a studio, this shield enhances your sound quality by minimizing unwanted noise and reflections.