RATV65L | RATV80L: How To Set Up & Use

Introduction:

This guide will walk you through the simple and straightforward steps to install and operate your Rockville RATV All-In-One Handlebar Mount Bluetooth Speaker System. It covers both the RATV65L and RATV80L models, which differ only in speaker size and power output:

• RATV65L: Dual 6.5” woofers, 250W RMS
• RATV80L: Dual 8” woofers, 300W RMS

These speakers are perfect for ATVs, UTVs, 4x4s, golf carts, snowmobiles, and more. No technical experience required!

What You’ll Need:

• RATV65L or RATV80L speaker system
• Included accessories:
  • Wired 12V cigarette lighter power connector
  • Wired handlebar remote control
  • Built-in 3.5mm AUX input
  • Four mounting straps
  • 12V power adapter with battery terminal connectors
  • Wireless LED remote control

Step-by-Step Instructions:

1. Mounting the Speaker

1. Position the speaker on a stable location on your ATV, UTV, or vehicle frame.
2. Wrap the mounting straps around the back of the speaker and any secure railing or hook on your vehicle.
3. Feed the strap through the built-in hook on the back of the speaker.
4. Pull tight and fasten the Velcro so the speaker is secure and won't move while driving.
5. Repeat for all 4 straps to ensure a snug and stable fit.

2. Powering the Speaker

Option A: Using Your Vehicle’s 12V Cigarette Lighter Port

• Plug the wired cigarette lighter power connector into your vehicle's 12V port.
• Once connected, the speaker lights will turn on to confirm power.

Option B: Connecting Directly to the Vehicle Battery

1. Plug the power connector into the included 12V power adapter.
2. Connect the red wire to the positive (+) terminal of your battery.
3. Connect the black wire to the negative (-) terminal.

Tip: Run the power cable through an opening that avoids engine components or moving parts.

3. Playing Music

Option A: AUX Input

• Use a 3.5mm AUX cable to connect an MP3 player or smartphone to the built-in AUX port.

Option B: Bluetooth Connection

1. Press the play button on the handlebar remote until the Bluetooth indicator light flashes.
2. On your phone, go to Bluetooth settings and select “RATVL” to pair.
3. Once connected, a tone will confirm the connection.

4. Using the Handlebar Remote

• The handlebar remote is waterproof and designed for gloved use.
• Mount it securely near your handlebar or dashboard.
• Use the remote to:
  • Play/Pause music
  • Skip tracks forward or backward
  • Adjust volume by long-pressing:
    • Fast forward to increase volume
    • Rewind to decrease volume

5. Controlling the LED Lights

Use the multifunction wireless remote to customize your speaker’s LED lights:

• Mode button: Switches between strobe, pulse, and other lighting modes
• Speed buttons: Adjusts how fast the lights change
• Color buttons: Cycles through available lighting colors
• Color Select: Chooses between 7 colors (White, Red, Green, Purple, Yellow, Blue, Pink)
• Power button: Turns LED lights on or off

Troubleshooting & FAQs

Q: My speaker won’t power on. What should I check?

• Make sure the cigarette lighter port is working.
• Double-check the battery connections if using direct wiring.
• Confirm that all wires are securely connected.

Q: Bluetooth isn’t connecting. What should I do?

• Ensure the speaker is in Bluetooth mode (flashing light on remote).
• Restart your phone’s Bluetooth and re-scan.
• Make sure the speaker isn't already paired with another device.

Q: The speaker is sliding or bouncing while driving. How can I fix this?

• Re-tighten the mounting straps and make sure they’re looped securely around solid frame sections.

Conclusion

You’re all set to enjoy powerful sound and dynamic lighting with your Rockville RATV speaker system. Whether cruising trails or parked at the campsite, this speaker brings the entertainment with you.