APM5 | APM6 | APM8: How To Set Up & Use

Introduction:

This guide will walk you through the simple setup process for your Rockville APM speakers. Whether you're using them for a studio, computer, or multimedia setup, these instructions are easy to follow—even if you have no technical experience.

Requirements:

• Rockville APM Series speakers (available in 5", 6.5", or 8" sizes)
• Included accessories: Power cable, speaker cable
• Optional: RCA to AUX cable, USB cable, TRS cables, interface/mixer, computer

Step-by-Step Instructions

1. Powering the Right Speaker

• Locate the included power cable.
• Plug the female end into the power socket on the back of the right (main) speaker.
• Plug the male end into a standard power outlet.

2. Connecting the Left and Right Speakers

• Take the included speaker cable.
• Plug one end into the "Out to Left Speaker" jack on the back of the right speaker.
  • Tip: Align the groove on the cable with the bottom pin of the jack before inserting.
  • Twist the threaded collar to secure it.
• Plug the other end into the back of the left speaker, aligning the groove and securing the connection the same way.

3. Audio Input Options

The Rockville APM speakers support multiple input types. Choose the option that fits your setup:

Option A: RCA to AUX (for phones, tablets, etc.)

• Plug RCA connectors into the RCA input on the speaker.
• Plug the AUX end into your device’s headphone jack.

Option B: USB Connection (for computers)

• Use a USB cable to connect the speaker to your computer’s USB port.

Option C: TRS/XLR Inputs (for audio interfaces or mixers)

• Use two TRS (1/4") cables:
  • Connect the left and right outputs from your audio interface to the TRS inputs on the speaker.
• Before plugging in, turn the speaker volume all the way down to prevent loud pops or noise.

4. Adjusting Volume and EQ Settings

• Turn the power switch on (located on the back of the main speaker).
• Use the top-mounted volume knob to adjust output level.
• Use the Bass and Treble switches to shape your sound:
  • Left position: -4dB cut
  • Middle position: Flat/neutral
  • Right position: +4dB boost

5. Additional Features

• Headphone Jack: Located on the speaker for private listening.
• Versatile Inputs: Connect mixers, interfaces, or media players using RCA, USB, XLR, or TRS connections.

Troubleshooting & FAQs

Q: I connected everything, but there’s no sound. What do I do?

• Ensure the volume knob is turned up.
• Double-check all cable connections.
• If using an audio interface, make sure it’s selected as the output device in your computer’s sound settings.

Q: Can I use these speakers with my computer and DAW software?

• Yes. When using an interface, make sure it’s connected to both your computer and the speakers.
• In your system audio settings, set your interface as the default output.

Q: Are these speakers good for music production?

• Absolutely. With clear highs, balanced mids, and a tight low end, they’re perfect for DAWs like GarageBand, Audacity, and Pro Tools.

Conclusion

Setting up your Rockville APM speakers is quick and easy. With multiple input options and sound-shaping controls, these speakers are perfect for any audio setup.