RVMIC1 V2: How To Attach A Phone or Tablet

Introduction

The Rockville RVMIC1 V2 stand is not only great for microphones but also serves as a versatile holder for tablets and smartphones. This makes it ideal for music performances, live streaming, recording, and presentations. This guide will show you how to securely attach and adjust the tablet/smartphone holder for an optimized setup.

What You’ll Need

✔ Rockville RVMIC1 V2 Stand
✔ Tablet or Smartphone Holder (included with the stand)
✔ Tablet or Smartphone
✔ Charging Cable (optional)
✔ Cable Clips (included with the stand)

Step-by-Step Setup Instructions

1. Attaching the Tablet or Smartphone Holder

1. Locate the threading on the bottom of the tablet/smartphone holder.
2. Align it with the threading on top of the mic stand.
3. Screw the holder onto the stand until it is fully secure.

2. Adjusting the Holder Position

1. Use the side knob on the holder to tilt and position it for the best viewing angle.
2. Tighten the knob once you have it set at your preferred angle.

3. Placing Your Device in the Holder

1. Expand the holder to fit your tablet or smartphone.
2. Carefully insert your device and ensure it is held firmly in place.
3. Adjust the position as needed for optimal viewing and accessibility.

4. Organizing Cables for Charging (Optional)

If you need to charge your device while using the stand, follow these steps:

1. Plug in your charging cable to your smartphone or tablet.
2. Run the cable along the mic stand to avoid clutter.
3. Use the included cable clips to neatly secure the charging cable along the stand.

Conclusion

Setting up a tablet or smartphone holder on the Rockville RVMIC1 V2 stand is quick and easy. Whether you’re performing, streaming, or reading lyrics/scripts, this setup keeps your device stable and accessible.