GLIDETONE: How To Set Up & Use

Introduction:
This guide will walk you through how to set up and use your Rockville GlideTone Portable Speaker. The steps are simple and easy to follow, whether you're a beginner or a seasoned audio user. All you need is the speaker itself and the included accessories: a USB-C charging cable and a 3.5mm AUX cable.

Step-by-Step Instructions

1. What’s Included

• GlideTone portable speaker
• USB-C charging cable
• 3.5mm AUX cable

2. Understanding the Controls

Top Panel Controls

• Bass Knob: Adjusts the bass response of your music.
• Volume Wheel: Controls the speaker volume.

Playback and Mode Buttons (Left to Right)

• Back Button: Skip to the previous track.
• Forward Button: Skip to the next track.
• Mode Button: Switches between input sources (e.g., phone, tablet, AUX).
• Power Button:
  • Press and hold to power the speaker on/off.
  • Short press to play/pause music.
• TWS Button (True Wireless Stereo): Used to pair two GlideTone speakers for synchronized stereo sound.

3. Inputs and Ports (Located on the Back)

• USB Input:
  • Play music from a USB drive.
  • Can also function as a power bank to charge your devices.
• AUX Input (3.5mm):
  • Connect devices like tablets or phones using the included AUX cable.
• USB-C Port:
  • Used for charging the speaker.
• SD Card Slot:
  • Play music directly from an SD card.
• LED Indicator:
  • Flashes blue when searching for a Bluetooth connection.

4. Connecting via Bluetooth

1. Power on the speaker.
2. Open Bluetooth settings on your smartphone or tablet.
3. Select the device named GlideTone to pair.
4. A sound will confirm a successful connection.

5. Adjusting Sound

• Bass Knob: Turn up to enhance low-end response.
• Volume Knob: Increase or decrease output volume.

6. Using True Wireless Stereo (TWS) Mode

You can pair two GlideTone speakers to play audio from both at the same time:

1. Power on both speakers.
2. On one speaker, double click the TWS button.
3. A sound will indicate both are linked.
4. Connect your Bluetooth device to one of the speakers.
   • Music will play through both speakers simultaneously.
5. Use any control button (like play/pause) on one speaker — both will respond.

To Disconnect TWS Mode:

• Double click the TWS button again.
• A sound will confirm the disconnection.

Troubleshooting & FAQs

Q: My device isn’t pairing with the speaker. What should I do?

• Make sure the speaker is in pairing mode (LED flashing blue).
• Confirm Bluetooth is enabled on your device.
• Remove any previously paired devices and try again.

Q: Can I charge my phone with the speaker?

• Yes. Use the USB port on the back as a power bank.

Q: How do I know the speaker is turned on?

• You’ll hear a startup sound when powered on.

Q: Can I use both AUX and Bluetooth at the same time?

• No. Use the Mode button to switch between input sources.

Q: Will both speakers respond to control buttons when in TWS mode?

• Yes. Using buttons on one speaker (e.g., pause/play) will control both.

Conclusion

Setting up your Rockville GlideTone speaker is quick and hassle-free. From Bluetooth pairing to TWS stereo setup, you’ll be enjoying powerful, bass-rich sound in no time.