ISTAND G20: How To Set Up & Use

Introduction

The Rockville iStand G20 is a versatile gooseneck stand that can be attached to a desk, microphone stand, or karaoke setup. It includes a mic clip for dynamic microphones and a holder for smartphones, tablets, or monitors. This guide will walk you through multiple ways to set up your iStand G20 for various uses.

1. Attaching the iStand G20 to a Desk or Table

Step 1: Securing the Gooseneck to the Desk

1. Locate the clamp at the bottom of the gooseneck stand.
2. Loosen the clamp knob until there’s enough space to fit it onto the desk.
3. Position the clamp on the edge of the desk.
4. Tighten the knob to secure it.
5. Adjust the gooseneck to your preferred position.

Step 2: Attaching a Microphone (Optional)

1. Take the included mic clip and screw it onto the threading at the top of the gooseneck.
2. Insert your dynamic microphone into the clip.
3. Connect the microphone to your mixer, interface, or PA system.

Note: If using a condenser microphone, attach a shock mount instead of the mic clip.

Step 3: Attaching the Device Holder

1. Align the tablet/smartphone holder with the threading on the gooseneck.
2. Screw the holder onto the gooseneck.
3. Use the ball joints to adjust positioning.
4. Secure the angle by tightening the knob.

2. Attaching the iStand G20 to a Microphone Stand

This setup is ideal for reading lyrics, sheet music, or scripts while performing.

Step 1: Securing the Gooseneck to the Mic Stand

1. Loosen the clamp at the bottom of the gooseneck.
2. Position the clamp at your desired height on the mic stand.
3. Tighten the knob until the clamp is securely attached.

Step 2: Attaching the Device Holder

1. Align the tablet/smartphone holder with the top of the gooseneck.
2. Screw the holder onto the gooseneck.
3. Adjust the ball joints for the best angle.

Step 3: Mounting Your Device

• For Smartphones: Keep the holder vertical and use the top and bottom wings to secure your phone.
• For Tablets: Position the holder horizontally and use the side wings to hold the device.

3. Using the iStand G20 for a Second Monitor

Step 1: Attaching the Holder to the Gooseneck

1. Align the monitor holder with the top of the gooseneck.
2. Screw it on until secured.

Step 2: Mounting the Monitor

1. Position the holder vertically.
2. Insert the bottom of the monitor into the lower wing.
3. Stretch the top wing upward and release it to secure the monitor.
4. Adjust the angle and positioning using the ball joints.

Step 3: Connecting the Monitor

1. Use an HDMI, DisplayPort, or USB-C cable to connect the monitor to your computer.
2. Adjust display settings for extended or mirrored screens.

4. Setting Up the iStand G20 for Karaoke

Step 1: Attaching the Gooseneck to a Mic Stand

1. Loosen the clamp on the gooseneck stand.
2. Secure it to the lower section of the mic stand.

Step 2: Attaching the Device Holder

1. Align the holder with the top of the gooseneck.
2. Screw it on and adjust the ball joints.

Step 3: Mounting the Tablet

1. Position the tablet horizontally for better visibility.
2. Insert it into the holder’s wings and release.

Step 4: Pairing with a Karaoke Setup

1. Connect the tablet to a powered speaker via Bluetooth or AUX cable.
2. Open YouTube or a karaoke app to play instrumental tracks.
3. Sing along with the lyrics displayed on your tablet.

Conclusion

The Rockville iStand G20 is an adaptable stand that enhances studio, stage, and streaming setups. Whether used for microphones, tablets, monitors, or karaoke, this stand provides secure mounting and adjustable positioning.