ROCKnGo 10: How To Set Up & Use

Introduction

The ROCKnGO 10-Inch Portable PA Speaker is perfect for a variety of events like parties, speaking engagements, performances, karaoke, and more. This speaker is portable, with wheels, a top handle, and side handles for easy transport. It also features multiple input options, a wireless microphone, and Bluetooth compatibility, making it incredibly versatile. This guide will walk you through the easy setup process so you can get the most out of your ROCKnGO 10 speaker.

What You’ll Need

• ROCKnGO 10-Inch Portable PA Speaker
• Wireless microphone
• Mic holder (included)
• Power cable (included)
• AA batteries (for the wireless microphone)
• RCA to aux cable (included)
• Aux cable (included)
• Wireless remote control (included)

Step-by-Step Instructions

1. Set Up the Power Supply

• Connect the Power Cable: Plug the female end of the power cable into the back of the speaker, then plug the other end into a power outlet.
• Charge the Speaker: The power cable also charges the speaker, so you can use it later without needing to plug it in. You can also charge the speaker using a 12-volt battery port on the back of the speaker.
• Switch to Battery Mode: If you want to use the speaker on battery power, flip the power switch to the "battery" position. For now, leave it in the "power" mode to run off the power cable.

2. Attach the Mic Holder

• Position the Mic Holder: Line up the mic holder with the two holes on the left side of the speaker.
• Secure with Screws: Use the included screws to attach the mic holder in place.

3. Set Up the Wireless Microphone

• Install Batteries: Open the end cap of the wireless microphone to reveal the battery compartment. Insert two AA batteries.
• Reassemble the Microphone: Screw the end cap back on to secure the batteries in place.

4. Turn on the Speaker

• Press the Input Button: To take the speaker out of standby mode, press the "input" button on top of the speaker.
• Adjust the Mic Volume: Raise the microphone volume knob on the top of the speaker.
• Test the Microphone: Turn on the microphone, and you should hear your voice coming out of the speaker.

5. Connect Additional Audio Sources

• Quarter-Inch Microphone Inputs: You can connect additional microphones using the two quarter-inch mic inputs on top of the speaker.
  • Use a female XLR to quarter-inch cable to connect the mic to the input.
• XLR Input: You can also connect a microphone to the XLR input on the back of the speaker. Set the input mode to "aux 3" to hear it through the speaker.
• Smartphone or Tablet via Aux 1: Use the Aux 1 input to connect a smartphone or tablet. Set the input mode to "aux 1" to hear the music.
• USB/Memory Card: Insert a USB drive or memory card into the top of the speaker to play music. Set the input mode to "USB" for this source.

6. Connect a Guitar or Instrument

• Quarter-Inch Guitar Input: Plug your guitar or line-level instrument into the quarter-inch guitar input on the speaker.
• Adjust the Guitar Volume: Raise the guitar volume knob on top of the speaker.
• Raise the Main Volume: Turn up the main volume knob on the speaker to hear the instrument.

7. Use RCA Line Input and Output

• RCA to Aux Cable: Connect your smartphone or tablet to the speaker using the included RCA to Aux cable. Plug the RCA ends into the RCA input on the back of the speaker and the other end into your device.
• Expand Your Setup: Use the RCA line output on the speaker to connect to another speaker for a larger setup. Connect the RCA cable from the line output to the RCA input on the next speaker.

8. Fine-Tune the Sound

• Bass and Treble: Use the bass and treble knobs to adjust the low and high-end frequencies of the sound coming from the speaker.
• Echo Effect: Use the echo knob to add an echo effect to your voice.

9. Control Playback and Settings

• Record Function: Use the record button to record any audio coming into the speaker onto a USB drive. You can play back the recorded audio using the record/play button.
• Mic Priority: The mic priority button lowers the music volume when speaking into the wireless microphone.
• Repeat Function: Press the repeat button to repeat a track.
• Play/Pause and Skip Buttons: Use the previous/rewind, pause/play, and fast forward/skip buttons for controlling music playback.

10. Bluetooth Connection

• Set Input to Bluetooth Mode: Press the input button to set the speaker to Bluetooth mode.
• Pair Your Device: On your smartphone or tablet, go to the Bluetooth settings and select "ROCKnGO 10" to pair.
• Confirm Connection: You’ll know the device is connected when you hear the chimes.

11. Test the Sound

• Play some music or use the microphone to test the sound. Adjust the volume and settings to suit your needs.

Conclusion

The ROCKnGO 10-Inch Portable PA Speaker is an easy-to-use and versatile sound system for parties, karaoke, events, and performances. With Bluetooth, multiple input options, and a wireless microphone, it’s ready for any setup. By following these simple steps, you can have it up and running in no time.