G-CHARGE 20: How To Charge

Introduction

The Rockville G-CHARGE 20 is a battery-powered amplifier, allowing you to play without needing a power outlet. However, when the battery runs low, you’ll need to recharge it. This guide walks you through the simple process of charging your amp.

Charging the G-CHARGE 20

Step 1: Connect the Power Cable

1. Take the included power cable.
2. Plug the female end into the charging port on the back of the amp.
3. Plug the other end into a wall outlet.

Step 2: Understanding the LED Indicators

• Low Battery LED: Lights up when the amp is charging.
• Charged LED: Turns on when the amp is fully charged and ready to use.

Step 3: Using the Amp While Charging

• You can still play through the amp while it’s plugged in and charging.
• If you prefer, you can also use the power cable to run the amp directly from a wall outlet instead of the battery.

Conclusion

Charging your Rockville G-CHARGE 20 is quick and easy. Just plug it in, wait for the charged LED to turn on, and you’re good to go!