4 Pack MINI RF1: How To Set Up

Introduction

This guide will walk you through setting up the Rockville Mini RF1 4-Pack. Whether you're wall washing, mounting on trusses, lighting DJ facades, or using DMX control, this guide covers everything you need to get started.

What’s Included?

• 4 Mini RF1 Wash Lights (Preloaded in the carrying bag)
• Charger
• Wireless Remote (one for each light)
• Carrying Bag with Adjustable Dividers

The bag includes velcro dividers, allowing you to customize storage for your lights, chargers, and remotes.

Setting Up Your Mini RF1 Lights

Step 1: Ensure Remote Compatibility

• Set the light to Pink Mode to enable remote control functionality.
• If the light is not in Pink Mode, the remote will not work.

Lighting Setup Options

1. Wall Washing

• Option 1: Use Rubber Feet
  • Place the light flush against the wall to shine directly upward.
• Option 2: Use the Bracket
  • Position the light a few inches from the wall and angle it for the desired effect.

2. Truss Mounting

To mount the Mini RF1 on a truss, you will need a Rockville LC70 lighting clamp.

Steps to Attach the Clamp:

1. Remove the bolt piece from the bottom of the light.
2. Align the clamp’s holes with the bracket holes.
3. Reinsert and tighten the bolt to secure the clamp.
4. Loosen the clamp screw, attach it to the truss, and tighten to lock it in place.

Tip: Since the Mini RF1 is battery-powered (10-15 hours per charge), no power cables are required for mounting!

3. Totem Stand or DJ Facade Illumination

• Totem Stand:
  • Lift the scrim and place the light in the center of the totem stand.
  • Bracket removal recommended for a cleaner look.
• DJ Facade:
  • Position the light flush inside the DJ facade.
  • Use multiple lights for a stronger effect.

4. Table or Bottle Lighting

• Perfect for bars, parties, and events.
• Bracket removal recommended for a sleeker, elegant look.

Operating the Mini RF1

Turning the Light On and Selecting Modes

• Press the middle button to power on the light.
• Use the button next to it to cycle through the different modes.
• The LED indicator next to the mode button will change colors based on the mode selected:

Controlling the Mini RF1 with the Wireless Remote

Once the light is in Pink Mode, the wireless remote can be used to:

• Change Colors:
  • Red, Green, Blue, White, Amber, Ultraviolet
• Access Color Variations:
  • Use the Up/Down arrows to select variations.
• Select Preset Modes:
  • Auto Mode, Fade Mode, Snap/Pulse Mode, Sound Mode, Strobe Mode
• Adjust Strobe Colors:
  • Select a color first, then press Strobe Mode.
• Control Speed:
  • Use the Up/Down buttons to adjust mode speed.
• Turn Lights On/Off:
  • Control all lights in sync with one remote.

Using Wireless DMX Control

Setting Up Wireless DMX Mode

1. Set the lights to Light Blue Mode (Secondary/Wireless DMX Mode).
2. Turn on the DMX Controller:
   • Flip the main power switch and the DMX output switch.
3. Ensure the DMX Controller is set to Red Mode (to communicate with the Mini RF1).
4. Press Scanner 1 to control the lights using the faders.

DMX Fader Controls

• The higher the fader setting, the brighter the effect.
• Fader 9 determines the active mode based on DMX values.
• Fader 10 adjusts the speed of effects (faster color fades, strobe intensity, etc.).

Syncing Multiple Lights with Wireless Master-Slave Mode

1. Set the slave light(s) to Light Blue Mode.
2. Choose the Master Light and set it to the desired mode (e.g., Cycle Mode).
3. Hold down the Mode button for three seconds on the Master Light.
4. The LED next to the mode button will start flashing, and the Slave Light(s) will sync automatically.
5. Any changes made to the Master Light will be reflected on the Slave Light(s).

Conclusion

Setting up your Mini RF1 4-Pack is quick and easy, whether you’re mounting on a truss, wall washing, lighting up a DJ facade, or syncing with DMX control.

With multiple color modes, RF remote operation, and wireless master-slave capabilities, these compact wash lights are perfect for DJs, stage lighting, parties, and more.