DPM5 | DPM6 | DPM8: How To Set Up & Use

Introduction

The Rockville DPM Powered Studio Monitors are ideal for use in studios, computer setups, and many other applications requiring high-quality sound. Available in 5-inch, 6.5-inch, and 8-inch versions, these speakers deliver clear, balanced sound perfect for mixing, mastering, and casual listening. The setup is the same across all sizes, and the speakers are available in three finishes: black, white, and classic wood vinyl. This guide will walk you through setting up the 8-inch version, though the same steps apply to other sizes.

What You’ll Need

• DPM Powered Studio Monitors
• Power cable (included)
• Interface or mixer (for connecting your computer or audio source)
• Quarter-inch cables (for connecting to the interface)
• Computer (with sound output capability)

Step-by-Step Instructions

1. Power the Speakers

• Plug in the Power Cable: Take the female end of the included power cable and plug it into the back of each speaker.
• Connect to Power: Plug the other end of the power cable into a power outlet.
• Repeat for Both Speakers: Make sure both speakers are connected to power.

2. Choose Your Connection Method

The DPM speakers offer three different input options:

• RCA Input: Connect devices with RCA outputs (such as DJ equipment or certain audio devices).
• XLR Input: Use this for connecting to an audio interface or mixer for balanced audio.
• Quarter-Inch Input: Also designed for connecting interfaces or mixers, offering a balanced connection.

3. Connect Your Interface to the Speakers

• Using Quarter-Inch Cables:
  • Take two quarter-inch cables.
  • Plug one end of each cable into the quarter-inch output on your audio interface.
  • Plug the other ends into the quarter-inch balanced input on the back of the speakers.
• Adjust the Interface Settings: Make sure your computer’s sound settings are switched to output audio through the interface.

4. Turn On the Speakers

• Power On: Use the power switch on the back of the speakers to turn them on.
• Raise the Volume: Increase the volume using the volume knobs on the back of each speaker to a comfortable level.
• Adjust the Interface Volume: Ensure the volume knob on your audio interface is also raised appropriately.

5. Test the Sound

• Play Audio: Play a track from your computer or device to hear the speakers in action. The sound should come through clear, with balanced bass and crisp high frequencies.

6. Fine-Tune the Sound

• High Frequency Control:
  • Adjust the high-frequency knob on the back of the speakers to tweak the treble. You can boost or cut the high frequencies from -2 dB to +1 dB.
• Low Frequency Control:
  • Use the low-frequency knob to adjust the bass. Boost or cut the bass frequencies from -2 dB to +2 dB to suit your preferences or the acoustics of your space.

7. Enjoy Your Sound

• After adjusting the settings to your liking, enjoy the enhanced sound from the DPM Powered Studio Monitors. They should provide a full-range, clear, and accurate listening experience.

Conclusion

Setting up your Rockville DPM Powered Studio Monitors is a simple process, and they are ready to deliver high-quality sound in no time. Whether you're using them in your studio, for computer setups, or other applications, these speakers provide professional sound quality and versatile connectivity options.