P-SHELF: How To Turn A Keyboard Stand Into A DJ Table

Introduction

The P-Shelf is a versatile addition that can be easily attached to single-tier and dual-tier stands, such as the RKS S3X, PKS S35, RKS 42X, and PKS40. This guide will walk you through the steps to securely set up your P-Shelf, whether you're using it for a keyboard, laptop, mixer, or any other gear.

Step-by-Step Instructions

Setting Up the P-Shelf on Single Tier Stands

1. Aligning the Shelf with the Stand
   • Open the P-Shelf and check the wide opening inside.
   • Ensure that the stand fits within the parameters of this opening.
2. Attaching the P-Shelf to the Stand
   • For the PKS35, align the inside of the shelf to the top of the stand.
   • Ensure a snug fit, and then you can place your items on top of the shelf without worry.
   • To remove the shelf, simply lift it up when you're done.
3. Setting Up the RKS S3X Stand
   • Similarly, align the P-Shelf to the top of the RKS3X stand, ensuring a perfect fit.
   • Once set, place your items securely on the shelf and remove it as needed by lifting it.

Setting Up the P-Shelf on Dual Tier Stands

1. Preparing the Stand
   • For the PKS40, start by facing the tabs on the second tier downward. This will prevent the shelf from lifting up.
   • You can adjust the second-tier angle, either flat or slanted, according to your preference.
2. Attaching the Shelf to the Second Tier
   • Line up the inside of the P-Shelf with the second tier of the stand.
   • Once aligned, gently place the shelf down, and your second tier setup is complete.
   • If needed, you can remove the shelf by lifting it up.
3. Repeat for the RKS 42X Dual Tier Stand
   • Follow the same principles as the PKS40 setup.
   • Ensure the tabs on the second tier are facing downward and adjust the angle of the second tier for the best setup.

Using the P-Shelf with Single and Dual Tier PKS Stands

1. Attaching the Shelf to the Single Tier PKS35 Stand
   • For the PKS35, line up the inside of the P-Shelf with the top of the stand, and simply set the shelf down.
   • Place your items on top without any concerns of them falling through the middle.
   • To remove, just lift the shelf up.
2. Setting Up the Second Tier of the PKS40
   • For the PKS40 second tier, ensure the tabs are facing down.
   • Adjust the angle for a slight tilt or a flat position, depending on your needs.
   • Place the P-Shelf on the second tier, set it down, and the shelf is now in place.
   • Lift to remove once you're done.

Conclusion

Setting up your P-Shelf with either single or dual-tier stands is a quick and easy process. Once it's attached, you can place your gear on top with confidence, knowing it won't fall through. If you need to remove it, simply lift the shelf off the stand.