ROCKnGo 8: How To Set Up & Use

Introduction

The ROCKnGo 8 8-Inch Portable PA Speaker is perfect for events like parties, small speaking engagements, performances, karaoke, and more. It’s compact, portable, and easy to transport, with built-in wheels, a handle, and side handles for carrying. This speaker also offers a variety of input options, Bluetooth compatibility, and an included wireless microphone, making it versatile for a range of uses. In this guide, we’ll walk you through the steps to set up your ROCKnGo 8 speaker.

What You’ll Need

• ROCKnGo 8 8-Inch Portable PA Speaker
• Wireless microphone
• Aux cable (included)
• RCA to aux cable (included)
• Wireless remote control (included)
• Power cable (included)
• AA batteries for the microphone (included)
• Optional: Additional gear (smartphone, tablet, guitar, or mixer)

Step-by-Step Instructions

1. Set Up the Power Supply

• Plug in the Power Cable: Insert the female end of the included power cable into the back of the speaker. Plug the other end into a power outlet.
• Charge the Speaker: The power cable charges the speaker, allowing you to use it without being plugged in later. Alternatively, you can use the 12-volt battery ports on the back of the speaker to charge it with an external power source.
• Switch to Battery Mode: If you want to run the speaker on battery power, flip the switch to the battery position. For now, leave it in the “power” mode to run on the power cable.

2. Attach the Mic Holder

• Position the Mic Holder: Attach the mic holder to the right side of the speaker by lining it up with the two holes on the side.
• Secure with Screws: Use the included screws to secure the mic holder in place.

3. Set Up the Wireless Microphone

• Install Batteries: Unscrew the end cap of the microphone and insert the included AA batteries.
• Reassemble the Microphone: Screw the end cap back onto the microphone once the batteries are in place.

4. Power On the Speaker

• Press the Input Button: Press the input button to take the speaker out of standby mode.
• Adjust the Mic Volume: Turn the mic volume knob up on the top of the speaker.
• Increase the Main Volume: Turn up the main volume knob at the end of the speaker.
• Test the Microphone: Turn on the microphone and you should hear your voice through the speaker.

5. Additional Audio Sources

• Use Quarter-Inch Mic Inputs: If you want to connect additional microphones, use the two quarter-inch mic inputs on top of the speaker. Use a female XLR to quarter-inch cable for these connections.
• Connect via XLR Input: You can also connect a microphone using a regular XLR cable. Set the input mode to “aux 3” to use this connection.
• Aux Input: To connect a smartphone or tablet, use the aux 1 (3.5mm input) on top of the speaker. Set the input mode to “aux 1” to hear the sound.
• USB/Memory Card Inputs: Insert a USB drive or memory card to play music. Set the input mode to “USB” for this source.
• Guitar Input: Plug your guitar or instrument into the guitar input on top of the speaker. Adjust the guitar volume knob and the main volume to hear it through the speaker.

6. Use RCA Line Input/Output

• Connect via RCA to Aux Cable: Use the included RCA to Aux cable to connect a smartphone or tablet. Plug the RCA ends into the RCA input on the back of the speaker and the aux end into your device.
• Connect a Mixer: You can also connect a mixer to the speaker via the RCA line input.
• Expand Your Setup: Use the RCA line output to connect the ROCKnGo 8 speaker to an external speaker for a larger setup.

7. Fine-Tune the Sound

• Bass and Treble: Adjust the bass and treble knobs to control the low and high-end frequencies coming from the speaker.
• Echo Effect: Use the echo knob to add an echo effect to your microphone sound.

8. Control Music and Microphone Settings

• Record Button: Press the record button to record audio coming into the speaker onto a USB drive.
• Record/Play Button: Press the record/play button to play back recorded audio.
• Mic Priority: The mic priority button lowers the music volume when speaking into the microphone.
• Repeat Function: Press the repeat button to repeat any tracks.
• Playback Controls: Use the previous/rewind, pause/play, and fast forward/skip buttons to control music playback.

9. Bluetooth Setup

• Set the Speaker to Bluetooth Mode: Press the input button until the speaker reaches Bluetooth mode.
• Pair with Your Device: On your smartphone or tablet, search for the “ROCKnGo 8 8” device in Bluetooth settings and select it to pair.
• Confirm the Connection: You’ll know the device is connected when you hear a chime.

10. Test the Sound

• Play some music or use the microphone to test the speaker. Adjust the volume, bass, and treble as needed.

Conclusion

The ROCKnGo 8 8-Inch Portable PA Speaker is now set up and ready for use. Whether you’re hosting a party, performing karaoke, or giving a speech, this speaker provides clear, powerful sound in a compact, portable design.