ACC-T: How To Break Down Lighting Tree Accessory Bar

Introduction

When it’s time to pack up your Rockville ACC Lighting Tree, following these simple steps will ensure a smooth and secure breakdown process. This guide will walk you through removing the lights, collapsing the arms, and packing the stand into the included travel bag.

Step 1: Removing the Lights

1. Carefully unscrew the wing nuts and bolts holding each light onto the tree.
2. Hold onto the hardware (bolts, washers, and wing nuts) so nothing goes missing.
3. Set each light aside safely for transportation.

Step 2: Collapsing the Tree Arms

1. Push out the safety pins from each arm to unlock them.
2. Slowly lower each arm down to its folded position.
3. Reinsert the safety pins to prevent the arms from hanging loosely.

Step 3: Removing the Lighting Tree from the Stand

1. Loosen the knob on the side of the tree to detach it from the stand.
2. Gently lift the lighting tree off the stand and set it down.

Step 4: Packing Everything in the Travel Bag

1. Place the lighting tree inside the included bag.
2. Add the extension arm (if used) inside the bag.
3. Store the hardware (bolts, washers, and wing nuts) inside the bag to prevent losing them.
4. Zip the bag shut, ensuring all components are secure for transport.

Conclusion

Breaking down your Rockville ACC Lighting Tree is quick and hassle-free, making it easy to pack up for the next gig or store away safely. Always keep track of small hardware pieces to avoid losing essential parts.