Z-STREAM: How To Set Up

Introduction

This guide will walk you through setting up your Rockville Z-Stream USB Computer Microphone. The Z-Stream is great for live streaming, video conferences, online classes, recording setups, and more. Setup is quick and simple, even for beginners.

What’s Included:

• Microphone with attached USB cable
• Desk tripod stand
• Windscreen
• Adapter piece (for use with other mic stands)

No additional software or tools are required—just a computer with a USB port.

Step-by-Step Instructions

1. Set Up the Microphone Stand

1. Loosen the knob on the stand to raise the arm.
2. Adjust the height to your preference.
3. Tighten the knob to lock it in place.
4. Spread the tripod legs and place it securely on your desk.

2. Attach the Microphone

1. Leave the included adapter piece in place for this stand.
2. Screw the microphone onto the stand until it’s secure.
3. Slide the windscreen over the microphone to reduce popping and harsh sounds.

3. Connect to Your Computer

1. Plug the attached USB cable into any available USB port on your computer.
2. Open your computer’s sound settings.
3. Switch the input device to Microphone Z-Stream.
   • On Windows: Do this in the sound settings or in your recording software (e.g., Audacity).
   • On Mac: Do this in system sound preferences or in GarageBand.

4. Test the Microphone

1. Open your recording software or video chat application.
2. Speak into the mic and check for an input signal.
3. Record a short test clip if desired.

5. Use the Mute Function

• The power button doubles as a mute switch.
• When turned off, the microphone will not send any sound to your computer or application.

6. Set Input in Apps

For video conferencing or classes, make sure to select Microphone Z-Stream as the input device inside your app:

• Zoom
• Skype
• Other streaming or meeting platforms

Troubleshooting & FAQs

Q: My computer doesn’t recognize the microphone. What should I do?

• Try plugging into a different USB port.
• Restart your computer.
• Check sound settings to confirm “Microphone Z-Stream” is selected.

Q: The sound is distorted or too quiet.

• Make sure the windscreen is attached.
• Check the input volume levels in your sound settings or DAW.
• Position the microphone about 6–12 inches from your mouth.

Q: My microphone works in one program but not another.

• Each program (Zoom, Skype, GarageBand, Audacity, etc.) requires you to set the input device to “Microphone Z-Stream” separately.

Conclusion

Your Rockville Z-Stream USB Microphone is now set up and ready for recording, streaming, and conferencing. Just plug it in, select it as your input device, and you’re ready to go.