PLX12: How to Mount

Introduction

This guide explains how to properly mount and position your Rockville PLX12 speaker. The process is simple and easy to follow, even if you have no prior experience setting up PA speakers.

This article covers:

• Mounting the speaker on a stand 
• Adjusting the speaker angle 
• Using the speaker as a floor monitor 
• Fly mounting options 

What You’ll Need

• Rockville PLX12 speaker 
• Compatible 35mm speaker stand (optional) 

Mounting the PLX12 on a Speaker Stand

The PLX12 is designed to fit onto any standard 35mm speaker stand.

Step 1: Locate the Pole Mount

Turn the speaker over and locate the 35mm pole mount on the bottom of the speaker.

Step 2: Choose the Speaker Angle

The PLX12 includes an adjustable pole mount that allows you to change the speaker angle.

Available Angle Settings

• 0° Position 
  • Speaker faces straight ahead 
• 7.5° Position 
  • Speaker tilts downward slightly 

The downward angle can help direct sound toward the audience more effectively in certain setups.

Step 3: Mount the Speaker

1. Position the speaker stand securely on a flat surface. 
2. Lift the speaker carefully. 
3. Line up the pole mount with the top of the speaker stand. 
4. Lower the speaker onto the stand until it is fully seated. 

Make sure the speaker is stable before use.

Using the PLX12 as a Floor Monitor

The PLX12 can also be placed directly on the floor for monitor applications.

To Use as a Floor Monitor

1. Place the speaker on its angled side. 
2. Position it facing the performer or listening area. 
3. Adjust placement as needed for the best sound coverage. 

Fly Mounting the PLX12

The speaker includes built-in 12M8 fly points for suspended installations.

Important Notes

• Always use proper mounting hardware rated for the speaker weight. 
• Installation should be performed by qualified professionals. 
• Verify that all mounting points are secure before use. 

Troubleshooting & FAQs

The Speaker Feels Unstable on the Stand

Solutions

• Confirm the stand is compatible with 35mm pole mounts. 
• Make sure the speaker is fully seated on the stand. 
• Place the stand on a level surface. 
• Tighten any stand adjustment knobs. 

Which Angle Setting Should I Use?

Recommended Usage

• 0° Position 
  • General audience coverage 
  • Standard PA applications 
• 7.5° Position 
  • Elevated speaker placement 
  • Situations where sound needs to aim downward 

Can the Speaker Be Used Without a Stand?

Yes. The PLX12 can be placed on the floor and used as a monitor speaker.

Conclusion

The Rockville PLX12 offers flexible mounting options for different live sound applications. Whether you are using a speaker stand, floor monitor setup, or fly mounting system, the adjustable pole mount and built-in mounting points make setup quick and convenient.