How To Position Your TITAN15 V2 Powered Speakers

Introduction

This article covers the different positioning options available for your Rockville Titan15 V2 powered speaker. Whether you are mounting it on a speaker stand, using it as a floor monitor, or flying it overhead, the steps are simple and easy to follow, even for those with no technical experience. No additional tools are required beyond a compatible speaker stand or mounting hardware, depending on your chosen setup.

Step-by-Step Instructions

1. Pole Mount Options (Speaker Stand)

The Titan15 V2 has two 35-millimeter pole mounts located on the bottom of the speaker. Each provides a different angle when placed on a speaker stand.

• Rear pole mount: Positions the speaker vertically at a 0-degree angle (straight up and down).
• Front pole mount: Positions the speaker at a 15-degree downward tilt, which is useful for directing sound toward an audience below the speaker.

To use either option, simply align the desired pole mount with your speaker stand pole and lower the speaker into place.

2. Floor Monitor Position

Lay the speaker on its side on the floor to use it as a stage monitor. This is ideal for performers who need to hear themselves or their mix while on stage.

3. Flying the Speaker (Overhead Suspension)

The Titan15 V2 has three M8 attachment points for flying (suspending) the speaker overhead. Use appropriate rigging hardware rated for the weight of the speaker and ensure all mounting is done safely and securely.

Troubleshooting and FAQs

Q: Which pole mount should I use on my speaker stand?

A: Use the rear mount for a standard vertical position. Use the front mount if you need the speaker angled 15 degrees downward, such as when the speaker is elevated above the audience.

Q: Can I use any speaker stand with the Titan15 V2?

A: Yes, any speaker stand with a standard 35mm pole will work with either of the two pole mount points.

Q: What hardware do I need to fly the speaker?

A: You will need M8-compatible rigging hardware. Always ensure your rigging is rated for the weight of the speaker and installed by someone with proper experience.

Conclusion

The Rockville Titan15 V2 offers versatile positioning with two pole mount angles for speaker stands, a floor monitor option, and three M8 fly points for overhead suspension. Choose the setup that best fits your venue and application.