TITAN15 V2: How to Set Up TWS

Introduction

This article explains how to wirelessly link two Rockville Titan15 V2 speakers together using TWS (True Wireless Stereo) for stereo Bluetooth playback. The steps are simple and easy to follow, even for those with no technical experience.

Requirements:

• Two Rockville Titan15 V2 speakers
• A Bluetooth-enabled device (smartphone, tablet, or similar)

Step-by-Step Instructions

1. Designate a Primary and Secondary Speaker

Before starting the TWS setup, decide which of your two Titan15 V2 speakers will be the primary speaker and which will be the secondary speaker. The primary speaker is the one you will use to initiate the TWS link.

2. Activate Bluetooth Mode on Both Speakers

Press the Bluetooth button on the back of each speaker to activate Bluetooth mode on both units.

3. Initiate the TWS Link

1. Go to your designated primary speaker.
2. Press and hold the Bluetooth button for a few seconds.
3. The Bluetooth indicator lights on both speakers will turn red.
4. Wait until the light on the primary speaker is flashing and the light on the secondary speaker is solid. This confirms the TWS link is established.
5. You will hear a confirmation sound indicating the speakers are now connected to each other.

4. Connect Your Bluetooth Device

1. On your smartphone or tablet, open your Bluetooth settings.
2. Search for available devices and look for "Titan15 V2."
3. Tap on it to pair.
4. You will hear a confirmation sound once your device is successfully connected to both speakers.

5. Adjust the Volume

To ensure audio is playing through both speakers at the desired level:

• Raise the Channel 2 knob on both speakers.
• Raise the master volume on both speakers.
• Optionally, adjust the volume using your Bluetooth device's volume controls.

Troubleshooting and FAQs

Q: I linked my speakers via TWS but only one speaker is producing sound.

A: Make sure the Channel 2 knob and master volume are turned up on both speakers. Also confirm that the TWS link is active by checking that the Bluetooth light is flashing on the primary speaker and solid on the secondary speaker.

Q: I plugged a microphone into one speaker, but it only plays through that speaker. Why?

A: TWS only works for Bluetooth audio. Any wired input (microphone, instrument, etc.) will only play through the speaker it is physically connected to. It will not transmit to the other speaker over the TWS link.

Q: Can I use TWS with more than two Titan15 V2 speakers?

A: No. TWS links one primary speaker to one secondary speaker for a total of two units.

Q: How do I disconnect the TWS link?

A: Press and hold the Bluetooth button on the primary speaker again to deactivate the TWS connection, or simply power off one of the speakers.

Conclusion

Setting up TWS on your Titan15 V2 speakers is a quick process: activate Bluetooth on both units, hold the Bluetooth button on your primary speaker, and pair your device once the link is established. Remember that TWS only transmits Bluetooth audio between the two speakers; wired inputs remain local to the speaker they are connected to.