PKS35: How To Set Up & Use

Introduction

The Rockville PKS35 is a versatile keyboard stand designed for stability, customization, and easy setup. In this guide, we’ll walk you through the step-by-step process of assembling, adjusting, and customizing your stand. Whether you’re setting it up for a keyboard, adding accessories, or breaking it down for storage, these instructions will ensure a hassle-free experience.

Step-by-Step Setup Guide

1. Unfolding the Stand

1. Take the stand and locate the two legs.
2. Pull up the top leg completely to secure it in place.
3. Repeat the same step for the second leg.
4. The legs are now in position and ready for height adjustments.

2. Adjusting the Height of the Legs

1. Locate the knobs on each leg.
2. Loosen the knob to allow height adjustment.
3. Pull the leg upwards until you reach the desired height.
4. Use the built-in measurement guide to ensure even height on all legs.
5. (Optional) Attach the included measurement stickers next to the guide for easy reference.
6. Tighten the knob to lock the height in place.
7. Repeat for all legs.

3. Positioning the Stand

1. Flip the stand over to set it on its feet.
2. If the floor is uneven, loosen the leg knobs slightly and adjust until the stand is level.
3. Once leveled, tighten the knobs again to secure the stand.

4. Adjusting the Width

1. Locate the knobs underneath the stand.
2. Loosen each knob to allow width adjustment.
3. Pull each side outward to widen the stand or push inward to make it narrower.
4. Once the preferred width is set, tighten the knobs to lock it in place.

Cable Management & Organization

• The PKS35 includes holes along the sides for easy cable routing.
• Run power cables, audio cables, and other connections through these holes for a clean setup.
• For additional cable management, use Velcro straps or cable clips along the legs.

Adding Accessories

1. Installing a P-Shelf for a Tabletop Setup

• If you want to convert your stand into a table, use the optional P-Shelf accessory.
• Line up the P-Shelf with the top of the stand and place it down securely.
• Now, you have a flat surface to hold additional items such as controllers, mixers, or laptops.
• The shelf also features small holes for routing cables.

2. Attaching a Gooseneck Microphone Stand

• Loosen the clamp on the gooseneck mic stand.
• Choose a position on the stand’s bars (side or front).
• Slide the clamp onto the stand and tighten it to secure.
• Adjust the gooseneck to your preferred microphone position.
• Attach the mic clip and insert a dynamic or condenser microphone.
• Use the built-in cable holes to neatly route mic cables.

3. Adding a Pop Filter (For Condenser Microphones)

• Loosen the clamp on the pop filter.
• Attach it to the gooseneck microphone stand.
• Adjust the filter in front of the microphone to reduce plosives.
• Secure the clamp to keep the filter in place.

Breaking Down and Storing the Stand

1. If the stand is widened, loosen the knobs underneath and push the sides inward.
2. Tighten the knobs once the width is fully contracted.
3. Flip the stand upside down.
4. Loosen the knobs on the legs and fold them down.
5. Secure the knobs after folding.
6. Push down on the hinges to collapse the legs completely.
7. The stand is now compact and ready for transport or storage.

Conclusion

Setting up the Rockville PKS35 is simple and quick. With adjustable height, width, and the ability to add accessories like a shelf or microphone stand, it’s a great solution for musicians and producers. Follow these steps to customize your stand for your needs and enjoy a clean, organized workspace.