RHTSD: How To Set Up On Carpet / Hardwood Floors

Introduction

Setting up your RHTSD Speaker Stands on either hardwood or carpeted floors is easy with the included feet options. Whether you need extra stability on a soft surface like carpet or a hard surface like wood, this guide will show you the steps for both setups.

Step-by-Step Instructions

1. Attaching the Metal Spikes (for Carpet or Rug Floors)

• Step 1: Align the Spikes
  Take each metal spike and align it with the gold rings at the bottom of the stand.
• Step 2: Secure the Spikes
  Screw the spikes into the rings.
  • Tip: You don’t need to tighten them fully right away.
  • Why?: Loosening or adjusting the spikes allows you to balance the stand better for a stable setup on a carpet or rug.
• Step 3: Repeat for the Remaining Spikes
  Follow the same procedure for the rest of the spikes on the stand.

2. Attaching the Rubber Feet (for Hardwood Floors)

• Step 1: Align the Rubber Feet
  For hardwood floors, take each rubber foot and align it with the gold rings at the bottom of the stand.
• Step 2: Secure the Feet
  Screw the feet into place.
  • Tip: You can also adjust the tightness to achieve the best balance for your stand.
• Step 3: Repeat for the Remaining Feet
  Attach the rubber feet to the second stand using the same process.

Conclusion

Setting up your RHTSD Speaker Stands for either carpet or hardwood floors is simple, thanks to the two types of feet provided (metal spikes for carpet and rubber feet for hardwood). This ensures your stands are both secure and balanced, no matter your flooring type.