RHT28D: How To Set Up w/ Smaller Speakers:

Introduction

The Rockville RHT28D Speaker Stands come with two different top plate sizes to accommodate both small and large speakers. If you are mounting smaller speakers, it's best to use the smaller top plate for a more secure fit. This guide will walk you through the step-by-step installation process for smaller speakers.

What You’ll Need

• Smaller Top Plates (Included with the RHT28D Stands)
• Screws & Hardware (Provided in the package)
• Drill or Screwdriver (For securing the top plates)
• Sound Isolation Pads (Optional) (To reduce vibrations and prevent scratches)

Step-by-Step Installation for Smaller Speakers

1. Attach the Smaller Top Plates

1. Identify the smaller top plates included with the stand.
2. Locate the pre-drilled holes on the top of the stand.
3. If needed, use a screw to puncture through the protective film covering the holes.
4. Align the small top plate with the pre-drilled holes on the stand.
5. Insert four screws through the holes.
6. Use a screwdriver or drill to securely attach the plate.
7. Repeat these steps for the second stand.

2. Apply Sound Isolation Pads (Optional)

1. Remove the adhesive backing from each foam pad.
2. Place each pad on the corners of the top plate.
3. If the pads are too far out, adjust them closer to the center for better speaker placement.

3. Mount Your Smaller Speakers

1. Carefully place the speaker onto the top plate.
2. Ensure that the sound isolation pads provide proper grip and stability.
3. Adjust your speaker positioning as needed.

Conclusion

By following these steps, you can easily set up your Rockville RHT28D Speaker Stands for smaller speakers, ensuring stability, sound isolation, and improved audio performance.