RS-Series Speaker Stands: How to Set Up & Use – Rockville Audio

Introduction

The Rockville RS Series speaker stands are high-performance, heavy-duty stands designed for bookshelf speakers, studio monitors, and home theater setups. They come in three different sizes (37", 29", and 21") and are available in black or white to match various audio and home decor setups.

With a 60-pound weight capacity per stand, these are stronger than most competing stands, making them ideal for larger and heavier speakers. This guide will walk you through assembly, setup, and key features of the RS Series speaker stands.

What’s Included in the Box

(2) Vertical support beams
(2) Square top plates (for holding speakers)
(2) Rectangular base plates
(2) Foam isolation pads
(4) Rubber feet (for hardwood floors)
(4) Brass spikes (for dense carpets)
(1) Allen key (only tool needed for assembly)
(1) Screw set

Step-by-Step Assembly Guide

1. Attach the Vertical Beam to the Base Plate

Locate the pre-installed screw inside the vertical beam.
Use the Allen key to unscrew it.
Align the rectangular base plate with the vertical beam.
Insert the screw through the base plate and tighten it with the Allen key.

2. Attach the Top Plate

Place the square top plate on the vertical beam.
Align the pre-drilled hole in the top plate.
Insert and tighten the screw using the Allen key.

3. Apply Foam Isolation Pads

Peel the adhesive backing off the foam isolation pads.
Align them with the top plate where the speaker will rest.
Press down firmly for 10-15 seconds to ensure a secure fit.

4. Choose Floor Protection (Rubber Feet or Brass Spikes)

For hardwood floors and tile → Install rubber feet to prevent scratches.
For dense carpets → Install brass spikes for stability.

Key Features & Benefits

Heavy-Duty Construction

Holds up to 60 lbs per stand (3x the capacity of standard stands).
Sturdy aluminum and wood construction ensures durability.

Multiple Size & Color Options

Available Heights: 37", 29", and 21" to match different setups.
Available Colors: Black and White for versatile styling.

Built-In Cable Management

Two cable holes (top & bottom) allow you to hide speaker wires for a clean look.

Vibration & Resonance Reduction

Foam isolation pads help reduce unwanted vibrations for better sound clarity.
Brass spikes help stabilize speakers on thick carpets.

Best Use Cases

Home Theater Systems – Elevate speakers for optimal sound positioning.
Studio Monitor Stands – Ideal for recording studios and mixing setups.
Bookshelf Speakers – Perfect for desktop and computer desk setups.

Troubleshooting & FAQs

Q: Can these stands hold large speakers?
A: Yes! Each stand supports up to 60 lbs, making them ideal for large bookshelf speakers or studio monitors.

Q: What size should I choose?
A:

37" stands → Best for tall home theater setups.
29" stands → Great for standard bookshelf speaker placement.
21" stands → Ideal for studio monitors on a desk or workstation.

Q: Do these stands work on carpet?
A: Yes! Use the included brass spikes for added stability on dense carpets.

Q: Can I run cables through the stand?
A: Yes! The built-in cable management system allows you to hide wires neatly.

Conclusion

The Rockville RS Series speaker stands offer a sturdy, stylish, and easy-to-assemble solution for home theaters, studios, and bookshelf speaker setups. With multiple size and color options, a high weight capacity, and built-in cable management, these stands are the perfect blend of performance and design.