RSP36: How To Set Up & Use

Introduction

The Rockville RSP36 is a 36-inch mounting pole designed to securely stack a speaker on top of a subwoofer, creating a professional audio setup for live performances, DJ events, houses of worship, and more. This pole fits into any standard 35mm pole socket found on most subs and speakers.

This guide will walk you through:

• Installing the mounting pole
• Attaching the speaker
• Securing the setup
• Connecting to a mixer or audio system

Step 1: Insert the Mounting Pole into the Subwoofer

1. Place your subwoofer on a flat, stable surface.
2. Take the RSP36 mounting pole and insert it into the pole socket on the top of the subwoofer.
3. Ensure the pole is fully seated securely in the socket.

Step 2: Attaching the Speaker

1. Locate the 35mm pole socket on the bottom of your speaker.
2. Loosen the locking knob (if your speaker has one) on the back.
3. Carefully lift the speaker and align the socket with the top of the mounting pole.
4. Slide the speaker down onto the pole until it is fully seated.

Step 3: Securing the Setup

1. If your speaker has a locking knob, tighten it to ensure the speaker stays securely in place.
2. Gently shake the speaker and subwoofer to ensure stability.
3. Make adjustments as needed to balance the setup properly.

Step 4: Connecting the Speaker and Subwoofer to a Mixer

Now that your speaker and subwoofer are mounted securely, you can connect them to your sound system:

1. Power off all equipment before making connections.
2. Use XLR or 1/4” cables to connect the subwoofer to your mixer or audio source.
3. Run a signal cable from the subwoofer to the top speaker if necessary.
4. Adjust volume levels and power on your system.

Conclusion

The Rockville RSP36 mounting pole provides a sturdy and professional way to stack your speakers and subwoofers for any event. With easy installation, secure locking, and compatibility with 35mm pole sockets, it's a must-have for portable sound setups.