FLX SERIES: How To Add an Additional Shelf

Introduction:
Adding an additional Flex shelf to your Rockville Flex Stand is a simple process that allows you to increase your workspace or organize your setup. In this guide, we’ll walk you through the easy steps to attach the Flex shelf and customize the height between shelves according to your needs.

Requirements:

• Rockville Flex Stand
• Allen key (included)
• Flex Shelf
• Additional screws and tubes (included)

Step-by-Step Instructions:

1. Prepare the Stand and Shelf

• Start by grabbing your Flex stand and the Flex shelf you want to add.
• Use the Allen key that came with the stand to loosen the Allen screws on the top of the existing shelf.
• Once the screws are removed, take off the top shelf.

2. Attach the New Shelf

• Take the four additional screws that came with the Flex shelf and line them up with the tubes of the stand.
• Place the new shelf on top of the screws and feed it through to align it with the tube holes.

3. Secure the Tubes

• Take the additional tubes that came with the Flex shelf and line them up with the screw holes on the shelf.
• Screw them on tightly to secure the shelf in place.

4. Customize Shelf Height (Optional)

• If you prefer, you can use leftover tubes from the original Flex stand kit to customize the spacing between your shelves for more or less height between tiers.

5. Install the Top Shelf

• Once the tubes are in place, take the top shelf and line it up with the tubes.
• Insert the Allen screws into the holes at the top of the shelf and use the Allen key to tighten them, securing the top shelf in place.

Conclusion:

Now, your Flex stand is equipped with an additional tier for more storage or organization. Customizing the space between the shelves allows you to tailor your setup to fit your needs.