PIXEL HYBRID CHARGING CASE: How To Store, Charge & Transport

Introduction

In this guide, we'll show you how to set up your Pixel Hybrid Charging Case to store, charge, and transport your Pixel Hybrid Bar Lights. This case makes it easy to manage and keep your lights organized while ensuring they’re ready for your next event. Let’s walk through the process step by step!

Step 1: Unbox the Pixel Hybrid Charging Case

The Pixel Hybrid Charging Case comes with:

• A power cable to power the case.
• A power strip on the side to charge each light.
• Six available slots to store your Pixel Hybrid Bar Lights.

Step 2: Place the Lights Inside the Case

1. Prepare the Lights:
   • Take one of your Pixel Hybrid Bar Lights and guide it into one of the six slots inside the case.
   • Position the Light: Make sure that the light is facing downwards for a secure fit.
   • Secure the Light: Place the light gently in the slot. The padding inside the case will keep it secure and protected.
2. Connect the Power Cables:
   • Take the power cable for each light and plug the blue end into the power-in socket on the light.
   • Plug the other end of the power cable into the adjacent outlet on the case.
3. Repeat for Other Lights:
   • Follow the same procedure for each of the remaining lights. Ensure all the lights are securely placed and connected.
4. Store the Remotes:
   • You can also store the remotes for the lights inside the case, keeping everything in one place for easy transport.

Step 3: Transporting the Charging Case

1. Wheels for Easy Movement:
   • The case is equipped with wheels for easy transportation.
   • Two of the wheels have locks to keep the case stationary when needed.
2. Unlock the Wheels:
   • When you’re ready to move the case, simply unlock the wheels by pressing down on the locks.
3. Handles for Lifting:
   • If you need to lift the case, use the two handles on each side for a secure grip. It can be easily carried by two people if needed.

Step 4: Closing the Case

1. Secure the Lid:
   • To keep the case closed, lower the lid carefully.
2. Use the Butterfly Locks:
   • Twist the butterfly locks to the left to extend them.
   • Line them up with the latch and twist the lock to the right to secure the case.
3. Extra Security with a Padlock:
   • If additional security is needed, you can use a padlock through the designated holes on each side of the case.
4. Stacking Cases:
   • The case has grooves on top for stacking another case.
   • Lock the wheels of the case on top to ensure it doesn’t move while being transported.

Step 5: Charging the Lights

1. Power Up the Lights:
   • Plug the blue end of each light's power cable into the power-in socket on each light.
   • Connect the other end of the power cable into the outlet on the side of the case.
2. Charge the Case:
   • Plug the IEC end of the main power cable into the power socket on the outside of the case.
   • Connect the other end of the cable to a wall outlet or power source.
3. Turn on the Power:
   • Flip the switch on the case to the on position to start charging.
4. Charging Time:
   • If the lights are completely dead, they usually take about 6 hours to fully charge.
5. Monitor the Battery:
   • To check the battery life, turn on the lights and look at the battery life indicator on top of each light.
6. Ventilation:
   • We recommend leaving the case open while charging to ensure proper ventilation for the lights.

Conclusion

With the Pixel Hybrid Charging Case, it’s easy to store, charge, and transport your Pixel Hybrid Bar Lights. The setup process is simple and efficient, ensuring your lights are always ready to go when you need them.