WET-7020 | WET-6525: How To Set Up, Wire & Install – Rockville Audio

Introduction

This guide will walk you through the setup and installation of Rockville WET-7020 and WET-6525 4-Way Swivel Mount Wall Speakers. These weather-resistant, IPX55-rated speakers are designed for indoor and outdoor use, making them perfect for patios, restaurants, bars, and home audio setups.

These speakers support 70V, 100V, and 8-ohm settings, allowing them to integrate into both commercial 70V sound systems and home audio systems.

What’s Included

Each box includes:

(2) WET-7020 or WET-6525 Speakers
(1) 4-Way Swivel Mounting Bracket
(8) Phillips Screws for Mounting
(4) Locking Knobs for Securing the Speakers

Step 1: Understanding 70V & 8-Ohm Settings

These speakers have two operating modes:

70V/100V Mode:
- Uses a built-in transformer to pull a fixed amount of wattage from a 70V or 100V amplifier.
- Allows parallel wiring, meaning multiple speakers can be daisy-chained together.
- Tap settings for WET-7020:
  - 2.5W, 5W, 10W, 20W
- Tap settings for WET-6525:
  - 3.75W, 7.5W, 15W, 30W
- Example: If 10 speakers are tapped at 10W each, you need an amplifier that can deliver at least 100W.
8-Ohm Mode:
- Bypasses the transformer to function as a regular passive speaker.
- Connects to standard home theater receivers, stereo amplifiers, or powered subwoofers.

Step 2: Selecting & Wiring Your Speaker Mode

For 70V/100V Systems

Set the Tap Selector to the desired wattage (e.g., 10W).
Connect Speaker Wire:
- Red wire → Positive (+) terminal.
- Black wire → Negative (-) terminal.
Parallel Wiring:
- Connect positive to positive and negative to negative throughout your speaker chain.

For 8-Ohm Mode (Home Audio Setup)

Set the Tap Selector to 8Ω (Bypass Transformer Mode).
Connect Speaker Wire:
- Red wire → Positive (+) terminal.
- Black wire → Negative (-) terminal.
Connect to a Standard Amplifier or Bluetooth Home Theater Receiver.

Step 3: Mounting the Speakers

1. Choose a Mounting Location

For indoor use, mount on walls or ceilings.
For outdoor use, install on patios, decks, or commercial spaces.
Ensure the mounting surface can support the weight of the speaker.

2. Secure the Mounting Bracket

Hold the mounting bracket against the wall.
Use a pen or marker to mark the four screw hole positions.
Drill the screws directly into drywall (for lightweight installs) or use anchors for extra stability.
Tighten the four included Phillips screws to secure the bracket.

3. Attach the Speaker to the Bracket

Connect the speaker wire to the terminals before mounting.
Align the speaker mounting holes with the bracket holes.
Insert and tighten the locking knobs on both sides.
Adjust the swivel mount for your desired left, right, up, or down angle.

Step 4: Adjusting Speaker Position & Sound Quality

Use the 4-way swivel mount to direct sound toward the listening area.
If mounting high up, angle the speakers downward for better coverage.
If placing lower, angle them upward.
Hide speaker wire inside the wall for a cleaner installation.

Step 5: Testing & Optimizing Your Setup

For 70V System

Turn on the 70V amplifier and play background music.
Adjust volume and EQ settings to balance the sound.

For 8-Ohm System (Home Audio Setup)

Connect the speakers to a Bluetooth Home Theater Receiver.
Play background music and adjust volume levels.
Consider adding a powered subwoofer (e.g., Rock Shaker Subwoofer) to enhance bass response.

Final Setup Example (With a Subwoofer)

Run the WET-7020 or WET-6525 speakers at 8 ohms with a home amplifier.
Connect a Rockville Rock Shaker Subwoofer for deep bass response.
Adjust sound levels to create a balanced audio environment for your restaurant, backyard, or home setup.

Conclusion

The Rockville WET-7020 and WET-6525 speakers are versatile, weather-resistant, and easy to install. Whether you're setting up a commercial 70V system or a home audio setup, these speakers deliver crisp highs, clear mids, and great bass when paired with a subwoofer.