PRE-70V: How To Mount In A Rack – Rockville Audio

Introduction

The Rockville PRE-70V preamp can be rack-mounted for a clean and organized setup, especially when used with an amplifier and other audio equipment. This guide will walk you through the step-by-step process of securely mounting your preamp in a rack.

What You’ll Need

✅ Rockville PRE-70V Preamp
✅ Included Rack Ears and Handles
✅ Screws (Included in the Package)
✅ M6 Screws and M6 Nuts (For securing to the rack)
✅ Screwdriver (Flathead & Phillips)
✅ Rack Unit (Standard 19" Equipment Rack)

Step-by-Step Instructions

1. Attach the Rack Ears

Locate the mounting holes on each side of the preamp.
Align the rack ears with the three small holes on each side.
Use the round-head screws included in the package to secure the rack ears to the preamp.
Tighten the screws with a Phillips screwdriver to ensure a firm fit.

2. Attach the Handles

Align the handles with the holes on the rack ears.
Use the flathead screws to secure the handles.
Tighten the screws firmly to ensure stability.

🔹 Alternative Method: You can attach the handles first and then mount the rack ears to the preamp—either method works.

3. Identify the Rack Spacing

The PRE-70V requires 2U of rack space.
Each U (unit) is counted by three rows of holes on the rack.
To measure:
- Count three holes for 1U.
- Leave one space and count another three holes for 2U spacing.
Ensure you leave enough space below the amplifier if mounting under an existing unit.

4. Install the Preamp into the Rack

Use the handles to carefully guide the preamp into place.
Align the screw holes on the rack ears with the rack’s mounting holes.
Insert M6 screws into the holes.
Secure with M6 nuts on the back for extra stability.
Tighten all screws to ensure the preamp is firmly mounted.

5. Connect Your Equipment

Now that the preamp is secured in the rack, you can:
- Connect it to your amplifier using the appropriate outputs.
- Set up your 70V speakers to the preamp.
- Connect audio sources like Bluetooth, USB, SD card, or FM radio.

Conclusion

Mounting your Rockville PRE-70V preamp in a rack ensures an organized, secure, and professional setup. Follow these steps carefully, and you’ll have your system up and running in no time.