BLUDAC2: How To Set Up w/ A TV

Introduction

The Rockville BlueDAC 2 is a high-performance Bluetooth DAC and receiver that can enhance your TV’s audio by converting its digital signal into high-quality analog sound. This guide will walk you through the step-by-step process of connecting your TV to the BlueDAC 2 using the optical input.

What You Need

• Rockville BlueDAC 2
• Optical (TOSLINK) cable
• TV with an optical audio output
• Speakers or amplifier connected to the BlueDAC 2

Step 1: Connecting the Optical Cable

1. Locate the optical output on your TV (usually labeled "Optical Out" or "Digital Audio Out").
2. Take your optical cable and plug one end into the optical output on your TV.
3. Check if the other end of the cable lights up red—this indicates that the TV is sending audio through the optical connection.
4. Plug the other end into the optical input on the BlueDAC 2 receiver.

Step 2: Setting the BlueDAC 2 to Optical Mode

1. Press the "Select" button on the BlueDAC 2 until it switches to "Optical Mode."
2. Ensure your speakers or amplifier are properly connected to the BlueDAC 2.

Step 3: Adjusting TV Audio Settings

1. Go to the "Settings" menu on your TV.
2. Navigate to "Audio" or "Sound Settings."
3. Find the "Audio Output" option and select "Optical Audio Out" (or a similar option).
4. Go into the "Advanced" or "Expert" audio settings.
5. Set the audio format to "PCM"—this ensures the TV sends a stereo signal compatible with the BlueDAC 2.

Step 4: Adjusting Sample Rate and Bit Depth (If Available)

• Some TVs allow you to adjust the sample rate and bit depth in the Advanced Audio settings.
• If available, set the sample rate to 48kHz or 96kHz for optimal sound quality.
• If your TV does not allow adjustments, the BlueDAC 2 will automatically detect and convert the sample rate for the best analog sound output.

Step 5: Testing the Connection

1. Raise the volume on your TV and ensure the sound is coming through your speakers.
2. If no sound is coming out:
   • Check the TV’s audio output settings to make sure it’s set to Optical Audio Out.
   • Ensure PCM is selected as the output format.
   • Verify that the BlueDAC 2 is in Optical Mode.

Conclusion

Connecting your TV to the BlueDAC 2 using the optical input is a simple way to improve your audio experience by sending high-quality stereo sound to your speakers or amplifier. The BlueDAC 2 automatically detects and converts the digital signal for the best analog output.