RCM PRO: How To Set Up w/ Computers – Rockville Audio

Introduction:
This article provides clear, step-by-step instructions for setting up a Rockville condenser microphone on both Windows and Mac computers. It includes helpful tips for different setups, troubleshooting, and ensuring the microphone works properly for recording. These steps are designed to be easy to follow, even for those with little technical experience.

Requirements:

Rockville condenser microphone (e.g., RCM O2)
A Windows or Mac computer
Audio interface (if necessary)
Software for recording audio (e.g., Audacity or GarageBand)
Optional: Rockville PSP-5 Phantom Power Box (if needed for additional power)

Step-by-Step Instructions:

1. Setting Up on Windows:

1.1. Connect the Microphone:

Most PCs have an 8-inch microphone input (usually pink).
Use the included cable with a female XLR connection on one side and an 8-inch male jack on the other.
Plug the female XLR end into the microphone and the 8-inch male jack into the microphone input on your computer.

1.2. Configure Sound Settings:

Condenser microphones need DC voltage (phantom power) to work.
Some PCs provide 48V of phantom power; others provide only 10V or none.
If the microphone is not picking up sound, adjust the microphone gain in your PC's sound settings.
- Go to "Sound Settings" > "Device Properties" > Increase microphone volume to 100%.

1.3. Test the Microphone:

Open a recording program like Audacity.
Ensure the correct microphone input is selected in Audacity.
Record a test (e.g., "Test 1, 2, 3") to confirm the microphone is working properly.

1.4. If Additional Power Is Needed:

If your PC doesn't provide enough phantom power, use the Rockville PSP-5 Phantom Power Box.
Connect the XLR cable from the microphone to the PSP-5, then connect the PSP-5 to your computer via the included cable.
Plug in the power to the PSP-5 and turn it on to provide 48V of phantom power.

1.5. Final Testing:

Once the phantom power is active, check your sound settings again and adjust the volume if needed.
Record another test in Audacity to ensure proper levels are being captured.

2. Setting Up on Mac:

2.1. Using an Audio Interface:

Due to changes in Apple’s hardware, Mac computers no longer support condenser microphones through the headphone jack.
The simplest solution is to use an audio interface like the Scarlett 2i2.

2.2. Connecting the Microphone:

Plug the XLR cable from your Rockville condenser microphone into the Scarlett 2i2.
Connect the Scarlett 2i2 to your Mac via USB (ensure compatibility with your Mac’s port type, such as USB-C).

2.3. Activate Phantom Power:

On the Scarlett interface, enable 48V phantom power for your condenser microphone.
Adjust the input gain on the interface to ensure proper levels.

2.4. Configure Sound Settings:

Go to your Mac’s Sound Settings.
Select the Scarlett 2i2 as both the input and output device.

2.5. Record in GarageBand:

Open GarageBand or another audio recording software.
The Scarlett interface should automatically be detected. Set it as the input device.
Record a test ("Test 1, 2, 3") and check the recording levels.

Troubleshooting & FAQs:

My microphone isn’t picking up any sound. What should I do?
- Make sure the microphone is correctly plugged into the microphone input on your computer or interface.
- Ensure that phantom power is enabled (48V) if needed.
- Increase the microphone gain in your computer’s sound settings or recording software.
What if my PC doesn't have an 8-inch microphone input?
- You’ll need an audio interface (e.g., Scarlett 2i2) to connect your microphone to the computer.
What if my computer doesn’t provide phantom power?
- Use a Phantom Power Box (e.g., Rockville PSP-5) to provide the necessary 48V power.
How can I ensure the microphone is set up correctly in my recording software?
- In programs like Audacity (Windows) or GarageBand (Mac), ensure that the correct input device is selected in the program’s settings.

Conclusion:
Setting up your Rockville condenser microphone on both Windows and Mac is simple with the right tools. For most computers, a direct connection to the microphone input will work, though some PCs and Macs may require additional phantom power through an interface or power box.