RSM12P | RSM15P: How To Set Up & Use

The Rockville RSM Two-Way Passive Stage Floor Monitors are ideal for musicians, performers, or public speakers who need to hear themselves or their music clearly while on stage. These monitors are available in both RSM12P 12-inch and RSM15P 15-inch versions, with the setup process remaining the same for both sizes. Whether you're at a live event or a band rehearsal, these speakers provide excellent sound for stage monitoring.

What You’ll Need

• Rockville RSM Two-Way Passive Stage Floor Monitors (12-inch or 15-inch)
• Powered mixer or passive mixer and amplifier
• SpeakOn cables (quantity depends on setup)
• Microphone (optional for testing)
• Mixer (powered or passive)
• Amplifier (for passive mixer setup)

Step-by-Step Instructions

1. Unbox and Prepare the Monitors

• Each speaker has handles on either side for easy transport.
• A 35mm socket at the bottom of each monitor allows you to mount it on a speaker stand if needed.

2. Connect the Monitors to a Powered Mixer

• Plug the SpeakOn cables into the SpeakOn outputs on the back of your powered mixer.
• Connect the other ends of the cables to the SpeakOn inputs on the back of your RSM stage monitors.
• If you're using multiple monitors, you can daisy chain them by plugging one SpeakOn cable from the SpeakOn output of one speaker to the SpeakOn input of the next speaker.

3. Connect the Monitors to a Passive Mixer and Amplifier (Optional)

• In this setup, connect two XLR cables from the main left and right outputs of your passive mixer to the XLR inputs on the amplifier.
• Use SpeakOn cables to connect the amplifier to your main speakers, then daisy chain the monitors by connecting them via additional SpeakOn cables.

4. Adjust the Mixer Settings

• For live sound or rehearsal setups, plug your microphone into the desired channel on your mixer (e.g., Channel 1).
• Adjust the gain knob and volume fader on the mixer to achieve optimal sound levels.
• Raise the main left and right faders on the mixer to send the signal to your speakers.

5. Test the Setup

• Turn on your microphone or sound source.
• If everything is connected properly, you should hear sound from the monitors and main speakers.
• Adjust the levels on both the mixer and speakers for a balanced sound.

6. Connect Using Quarter-Inch Inputs (Optional)

• You can also use the quarter-inch inputs on the monitors to run your signal, but remember, you cannot use both SpeakOn and quarter-inch connections at the same time.

7. Fine-Tuning Your Setup

• Once your setup is powered on, test the sound coming from the speakers and monitors. You can adjust the volume knobs on the amplifier and mixer to achieve the right levels for your environment.

Conclusion

The Rockville RSM Two-Way Passive Stage Floor Monitors are now set up and ready for use. Whether you are performing live, in rehearsal, or giving a public speech, these monitors provide clear, powerful sound. The setup process is simple and versatile, allowing you to use a powered mixer, passive mixer, or amplifier based on your preferences.