Rockville Rock Matrix 4
4 Zone 8-Channel 600W RMS Multiroom/Multisource Receiver/Amplifier
Includes
- Amplifier/Receiver
- Remote
- Detachable Rackmount Ears
- Power Cable
- 1-Year Manufacturer's Warranty
Important Safety Instructions
To reduce the risk of electrical shock, never open the unit. No user serviceable parts inside. We recommend sending the unit to the Rockville service center for any repairs.
- Do not expose this unit to any kind of moisture.
- Please ensure that the unit is situated in a properly ventilated area.
- Do not attempt to operate this unit if the power cord has been frayed or broken.
- Do not attempt to break off or remove the ground prong. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
- Do not operate this unit if it is damaged.
- This unit is intended for indoor use only.
- Always mount this unit in a safe and stable manner.
- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to the point of exit from the unit.
- To avoid unnecessary wear and to improve the unit's life span, unplug the unit when not in use for extended periods of time.
Introduction
Multi Source/Multi Zone Matrix Routing
The Home Matrix 4 is a 4 zone home audio amplifier that allows you to route any source to any specific zone(s). For example, you can play Bluetooth on zones 1 and 2 and route microphone 1 to zones 1 and 2 while playing something in Zone 3 using an RCA input, and playing something else in zone 4 using the optical input.
Power and Flexibility
This is an 8 channel amplifier with 4 zones. Each zone has 2 sets of speaker outputs to power a left and right speaker. Each channel puts out 75 watts RMS @ less than 1% THD. (Most ceiling speakers are around 40 watts only so this has more than enough head room). Each zone also has an RCA line output which allows you to add a subwoofer, or an additional amplifier, or more speakers to expand that zone.
Lots of Playback Options
This receiver has built in Bluetooth playback, USB playback, optical input, coaxial input, RCA input, FM radio, and 2 mic inputs.
Flexible Controls
The controls are really easy to use. You can easily route any source to any zone(s) and select the volume levels for that zone from the unit or from the included remote. There are bass and treble EQ controls to customize the sound. The mic inputs have mic volume, mic bass, mic treble, echo, and delay controls making this perfect for karaoke and PA announcements.
Applications
- Multi-room Home Audio System
- Bar
- Restaurant
- Office
- School
Functions
Front Panel
- Zone 1 – 4 Controls:
- Bluetooth Status LED → Flashes when in pairing mode (no device connect). Solid when Bluetooth device is connected.
- Input Selection Buttons w/ LED Indicators → Select (1) audio source for each zone. The same source can be selected for multiple zones.
- Signal Output Indicator → Illuminates as sound is coming of the associated zone.
- Zone Volume Control → Independent volume control for each zone.
- Zone Bass Control → Controls the low end or how deep the sound will be for each zone.
Please note: Certain speakers will begin to clip or distort and can become damaged from too much bass. - Zone Treble Control → Turn down to make sound less tinny, or up to make sound brighter and clearer in a particular zone.
- Music Master Volume → Controls the overall music output volume. Press to select and adjust volume for individual zones. Zones are shown on the display screen as Z1, Z2, Z3, and Z4. The selected zone's name will flash and the numerals underneath will change as per your adjustments. To exit individual zone volume adjustment mode, simply wait 2 to 3 seconds until the selected zone's name stops flashing.
- LCD → Displays mode and volume settings for each zone.
- FM Auto-Scan → Press to automatically scan and save all available stations. Press again to stop scan. Up to 40 stations can be saved.
- CH- and CH+ → Press to navigate forward or back through saved stations.
IR Sensor: Receives signal from remote control.
USB Port: Input for USB Flash / Thumb Drive
- MP3 Control Module:
- Play/Pause → Press to start or pause playback.
- |◀◀ → Press to return to the previous track.
- ▶▶| → Press to proceed to the next track.
- Power: ON/OFF Switch
- Vocal Effects:
Mic Echo → Add a reverb effect to the microphones for singing.
Mic Delay → Add a repeating delay effect to the microphones for singing.
- Mic 1 Priority → For making announcements via the Mic 1 input. When this function is active, the LED indicator will be solid green and the volume of the music will lower when speaking through the mic.
Microphone Inputs → Two 1/4" TS (Tip Sleeve) inputs for wired microphones or wireless mic receivers.
⚠️ When the Mic 1 Priority button (#11 above) is pressed, input signal from this jack will override all other input signals.- Mic Volume Controls → Independent volume control for Mic 1 and Mic 2.
- Mic EQ → The bass and treble controls allow the user to make adjustments to these settings, which will affect overall microphone sound output.
- Rack-mounting Handles
Rear Panel
250V/6A Fuse → User Serviceable 250-Volt 6-Amp Fuse
Voltage Selector Switch → 115V/60Hz(US power standard) – 230V/50Hz(UK power standard)
- Optical Input
Coaxial Input
Telescoping FM Antenna → Expand to enhance FM radio reception.
- AC Input → Connection for standard IEC power cable (included).
- Stereo Zone 1 – 4 Speaker Outputs → Connect raw wire to 5-Way banana / binding post terminals or use banana plugs to connect speakers.
- Stereo Zone 1 – 4 Speaker Outputs → Connect additional amplifiers, powered speakers or subwoofers to any zone.
- RCA Line Input → Connect computers, CD players, MP3 / media players or any other external sound source with line-level output.
Remote Control
FM Radio Controls:
- CH- and CH+ → Press to navigate forward or back through saved stations.
- FM Auto-Scan → Press to automatically scan and save all available stations. Press again to stop scan. Up to 40 stations can be saved.
- MP3 Controls:
- Play/Pause → Press to start or pause playback.
- |◀◀ → Press to return to the previous track.
- ▶▶| → Press to proceed to the next track.
- Mic 1 Priority → For making announcements via the Mic 1 input. When this function is active, the volume of the music will lower when speaking through the mic.
- Master Volume → Press VOL- or VOL+ to decrease or increase the overall music output volume.
- Mute → When you press the mute button a relay will go off and you will hear a click. This sound is normal and does not mean there is an issue with the unit.
- Individual Zone Controls:
- Input → Press to select an input source; BT, USB, FM Radio, Optical/Coax, Aux.
- VOL- and VOL+ - Press to decrease or increase the zone's volume.
Inputs
Outputs
⚠️ It’s important that the impedance of your speakers is not below what your amplifier can handle. The HOME MATRIX 4 has a minimum speaker impedance of 4 ohms; hence, the total impedance of your speakers must not be less than 4 ohms.
⚠️ Be sure to observe proper polarity.
Option 1
One 4-ohm or 8-ohm speaker, attached to each channel (Left and Right) of each zone.
Option 2
Two 8-ohm speakers, in parallel, attached to each channel (Left and Right) of each zone.
Bluetooth
Pairing
- Turn the unit on and push the BT button on any of the zone control panels. The BT status LED will flash quickly indicating that the unit is in pairing mode.
- Locate and select HOME MATRIX 4 on your BT devices list of available connections.
- Upon successful pairing, the BT status LED will remain solid.
- To unpair, disconnect via your BT device's BT control panel. The unit will remember the last paired device.
Playback
- All playback functions are controlled via your BT device.
- Volume can be controlled via your device, the zone input's volume knob, and the master volume knob.
Please note: All volumes work independently of each other.
USB
Plug a USB drive into the USB port on the front panel. The unit will automatically begin to play music stored on the external device.
Playback (controlled from the unit or the remote control)
- Play/Pause: Press once to play current track; press again to pause.
- |◀◀ / ▶▶|: Press to return to previous track or proceed to the next track.
Compatibility
- Formatting the USB drive/SD card may not be necessary, but if you do so, do not use the NTFS format.
- Supported file formats: MP3, WMA, WAV
Optical / Coaxial
Many TVs, digital set-top boxes, and receivers players have optical (fiber optic) and/or coaxial outputs.
Optical Input
- Use a digital optical audio cable to connect the sound source to the amplifier.
- Power on the sound source and the HOME MATRIX 4.
- Press the OPT/COAX button on the appropriate zone control panel or press that zone's input button the remote control.
Coaxial Input
- Use a coaxial cable to connect the sound source to the amplifier.
- Power on the sound source and the HOME MATRIX 4.
- Press the OPT/COAX button on the appropriate zone control panel or press that zone's input button the remote control.
⚠️ Adjust your TV’s Audio settings (if experiencing issues): Select PCM format.
Mic Connections Volume, Echo, Delay & EQ
- Mic 1 / Mic 2: Connect a wired microphone or wireless mic receiver to either one of the ¼˝ Mic jacks.
⚠️ When the Mic 1 Priority button (#5 below) is pressed, input signal from the Mic 1 jack will override all other input signals. - Echo: The echo effect adds a series of repeated, decaying echoes to a sound. Equalizing the delays will change a room's sound characteristics from one that has reflective surfaces (brighter-sounding echoes) to one that is totally absorptive (darker-sounding echoes).
- Delay: Determines the amount of time between echo repetitions.
- Equalizer: The bass and treble controls allow the user to make adjustments to these settings, which will affect overall microphone sound output.
- Mic 1 Priority: For making announcements via the Mic 1 input. When this function is active, the LED indicator will be solid green and the volume of the music will lower when speaking through the mic.
Features
- 600 Watts Total RMS @ less than 1% THD (75 Watts RMS per zone x 8 zones)
- Route any sources to any zone
- Includes a remote with zone source and zone volume controls
- Supports 4-8 ohm speakers
- Bluetooth playback with quick phone connection and long range
- USB input to play audio stored on a thumb drive with matrix assigning to any zone
- RCA line input
- Optical input
- Coaxial input
- Built-in FM radio
- RCA output on each zone (four sets total)
- 8 sets of amplified speaker outputs
- Two 1/4" Mic inputs will play on all zones
- Master volume control knob
- Source selection on each zone
- Bass, treble, and volume control on each zone
- Mic inputs have volume control, bass, treble, echo, and delay controls
- 19" rack mountable (removable rack brackets)
- MIC priority function
- Built-in variable speed fan cooling system keeps component cool at all times
- 110/220V switchable
- Frequency Response vs THD + N (Worst case, across normal bandwidth 1w @ 8ohm): <1%
- Weight: 20.9 Lbs
- Dimensions with the included rack mount ears attached: 19" x 3.5" x 10.4" inches
- Dimensions without rack mount ears: 16.9" x 3.5" x 10.4"
Troubleshooting
Problem | Solution |
No power |
|
No sound / low sound / distorted sound |
|
Buzzing sound |
|
Mic feedback or poor sound |
|
Bluetooth pairing fails |
|
No USB playback |
|
Comments
0 comments
Please sign in to leave a comment.