ROCKNGO 800: How To Update Firmware

Introduction:

Please note: This update is only needed for RockNGo 800 Speakers purchased before 2024.

This guide will walk you through updating the software on your Rockville RockNGo 800. The update enhances Bluetooth sound quality and microphone sensitivity, optimizing your device for better audio performance.

What You Need:

• An empty USB flash drive (ensure it has no other files)
• A computer to download the update
• Rockville RockNGo 800 speaker

Firmware Update Instructions:

A. Download the Update

1. Use the link below to download the file if needed to resolve the low mic volume issue...
   • Update File Download
2. Transfer the update to a USB flash drive:
   • Make sure the USB drive is completely empty.
   • Copy the update file onto the drive.

B. Install the Update

1. Plug the USB drive into the USB port on the Rock-N-Go 800.
2. The device will play a tone indicating the update is starting.
3. The display will turn off as the update installs.
4. When the update is complete, you will:
   • Hear a second chime.
   • See the display turn back on.
5. Unplug the USB drive after the update is finished.

Step 3: Verify the Update

1. Test the microphone sensitivity:
   • Plug in a microphone and speak into it.
   • Notice the improved clarity and volume sensitivity.
2. Test Bluetooth sound quality:
   • Pair your phone to the Rock-N-Go 800.
   • The pairing sound should now be clearer and more pleasant.

Conclusion:

Updating your Rockville Rock-N-Go 800 is a quick and easy process that enhances audio performance and usability.