ROCKPAR50: How To Set Up Master / Slave Mode

Introduction

The Master-Slave function on the ROCKPAR50 Par Can Wash Lights allows multiple lights to synchronize without requiring a DMX controller. This is an easy way to create a coordinated light show for DJ setups, live performances, and stage productions.

This guide will walk you through how to connect and configure your lights for Master-Slave operation.

What You Need

• Two or more ROCKPAR50 Par Can lights
• DMX cables

Step 1: Connecting the Lights

1. Choose a Master light – This light will control all Slave lights.
2. Connect the lights using DMX cables:
   • Plug the male end of a DMX cable into the DMX Out port on the Master light.
   • Plug the other end into the DMX In port on the first Slave light.
   • For additional lights, repeat this process, daisy-chaining them together.

Step 2: Setting the Master Light

1. Turn on the Master light.
2. Select a mode or color:
   • You can use static colors, sound activation, auto modes, or other effects.
3. The Master light's settings will now be sent to the Slave lights.

Step 3: Testing the Master-Slave Setup

1. Change the mode or color on the Master light.
2. All Slave lights should follow the Master’s settings.
3. If everything is working correctly, your lights are now synchronized.

Conclusion

Setting up Master-Slave mode on your ROCKPAR50 Par Can Wash Lights is a simple and effective way to control multiple lights without a DMX controller. Whether you're using them for DJ performances, concerts, or stage productions, this method ensures synchronized lighting with minimal effort.