ROCK ZONE 8: How To Connect A Powered Speaker or Subwoofer

Introduction

The Rock Zone 8 receiver is highly versatile and can be expanded to fit your audio needs. One of the ways to enhance your setup is by adding a powered speaker or powered subwoofer to your system. This guide will show you how to connect your powered speaker or subwoofer to the Rock Zone 8 using the pre-outputs and get the best audio performance.

Step 1: Gather the Necessary Equipment

• RCA Cable: You’ll need an RCA cable to connect the receiver to your powered speaker or subwoofer.
• Powered Speaker/Subwoofer: Ensure your powered speaker or subwoofer is ready to be connected and powered on.

Step 2: Connect the RCA Cable

• Take the RCA cable and plug one end into Pre-output 1 (or Pre-output 2) on the back of the Rock Zone 8.
• Plug the other end of the RCA cable into the RCA input on your powered speaker or subwoofer.

Step 3: Power On Your Powered Speaker/Subwoofer

• Turn on your powered speaker or subwoofer and raise the volume to your desired level.

Step 4: Adjust the Main Volume on the Rock Zone 8

• Make sure to raise the main volume knob on the Rock Zone 8 so that the signal is sent out to the connected powered speaker or subwoofer.

Step 5: Enjoy the Sound

• Now that everything is set up, you can enjoy the added bass or sound quality provided by your powered speaker or subwoofer.

Conclusion

Setting up a powered speaker or subwoofer with the Rock Zone 8 is simple and significantly enhances your audio experience. Whether you're adding deep bass or expanding your audio setup, this connection will ensure superior sound quality.