BLUDAC2: How To Set Up w/ A Gaming Console

Pro Tip: Right-click the Vimeo logo to copy a link for the video into a new window.

Introduction

The Rockville BlueDAC 2 is a high-quality Bluetooth DAC and receiver that enhances your audio experience. This guide will walk you through the setup process for connecting your gaming console to the BlueDAC 2 using an optical (TOSLINK) cable.

What You Need

• Rockville BlueDAC 2
• Gaming console (PS5, Xbox Series X, etc.)
• Optical (TOSLINK) cable
• Receiver/amplifier or powered speakers

Step 1: Connecting the Optical Cable

1. Locate the optical (TOSLINK) output on your gaming console.
2. Plug one end of the optical cable into the console’s optical output.
3. Plug the other end into the optical input on the BlueDAC 2.

Step 2: Adjusting the Console's Audio Settings

1. Go into your gaming console's settings.
2. Find the "Audio" or "Sound" settings.
3. Change the audio output to "Optical" or "TOSLINK".
4. Make sure surround sound (Dolby/DTS) is disabled and set it to PCM (stereo output) for best compatibility.

Step 3: Setting Up the BlueDAC 2

1. Power on the BlueDAC 2.
2. Set the input mode to "Optical" (if it doesn’t switch automatically).
3. The BlueDAC 2 will automatically convert the digital signal into an analog signal for your amplifier, receiver, or powered speakers.

Step 4: Enjoy Your Enhanced Audio

• Your gaming audio will now play through your receiver or speakers with high-quality digital-to-analog conversion.
• For a better experience, adjust the EQ settings on your receiver/amplifier.

Conclusion

Setting up your BlueDAC 2 with a gaming console is a simple way to enhance your sound quality using optical audio output. If you have any issues, check your console's audio settings or ensure the optical cable is securely connected.