BLUDAC2: How To Pair Bluetooth Devices

Introduction

The Rockville BlueDAC 2 features Bluetooth connectivity, allowing you to wirelessly stream high-quality audio from your smartphone or tablet. This guide will walk you through the Bluetooth pairing process and provide alternative connection options.

Step 1: Set the BlueDAC 2 to Bluetooth Mode

1. Turn on the BlueDAC 2.
2. Press the "Select" button until the Bluetooth (BT) logo begins flashing—this indicates that the receiver is in pairing mode.

Step 2: Pair Your Device

1. Go to the Bluetooth settings on your smartphone or tablet.
2. Search for available devices.
3. Select "BlueDAC 2" from the list of available devices.
4. Once connected, the BT logo will stop flashing and remain solid, indicating a successful connection.

Step 3: Play Music

• Once paired, audio from your smartphone or tablet will now stream to the BlueDAC 2.
• The BlueDAC 2 automatically reads the Bluetooth sample rate at 48 kHz for high-quality sound.
• Adjust the volume on your smartphone, tablet, or external speakers as needed.

Alternative Connection: Using the Aux Input

If you prefer a wired connection:

1. Use a 3.5mm aux cable.
2. Plug one end into your smartphone or tablet and the other into the aux input on the back of the BlueDAC 2.
3. Press the "Select" button to switch the receiver to AUX mode.

Conclusion

Pairing your smartphone or tablet with the BlueDAC 2 via Bluetooth is quick and simple. It provides wireless, high-quality audio streaming for an enhanced listening experience. If you prefer a wired connection, you can also use the aux input.