BT-LINK: How To Set Up & Use

Introduction

The Rockville BT Link AUX to Bluetooth Adapters are a convenient solution for adding Bluetooth connectivity to devices that don’t have it, such as older speakers, car stereos, home audio systems, or pro audio systems. These adapters allow you to wirelessly connect your smart device to any speaker with an AUX input and even pair two speakers together for true wireless stereo (TWS) sound. Whether you’re hosting a party or setting up a sound system in different rooms, the BT Link is a simple and effective solution to improve your audio setup.

Step-by-Step Instructions

Step 1: Unbox and Prepare the Units

When you open the Rockville BT Link package, you will find:

• Two BT Link units (Master and Slave)
• Two charging cables
• Two detachable 3.5mm double male jacks
• Two quarter-inch TRS adapters
• Two 2-foot AUX cables
• A 3.5mm to RCA cable for RCA device connections
• A 3.5mm to male XLR cable for XLR device connections

Step 2: Turn On the BT Link Units

1. Turn on both the Master unit and the Slave unit.
   • Both units will flash red and blue to indicate they are looking for a connection.
2. Once they are connected, the Master unit light will stay lit, and the Slave unit light will continue to flash.
   • Note: The Master unit is used to control music playback (play, pause) and answer or reject calls.

Step 3: Connect the BT Link Units to Your Speakers

1. Take the Master BT Link unit and plug one end of the included AUX cable into the Master unit.
2. Plug the other end of the AUX cable into the AUX input of your first speaker.
3. For the Slave unit, use the 3.5mm male-to-male adapter or the included 2-foot AUX cable.
   • Plug one end into the Slave unit and the other end into the AUX input of the second speaker.

Step 4: Power On the Speakers

1. Turn on both speakers.
2. Ensure that the Master BT Link unit is connected to the first speaker and the Slave BT Link unit is connected to the second speaker.

Step 5: Pair the BT Link Units with Your Bluetooth Device

1. Go to your smartphone or tablet’s Bluetooth settings.
2. Search for the device named "BT Link" and select it to pair.
   • You’ll hear a chime when your device is connected to both speakers.

Step 6: Play Music and Adjust Volume

1. Once connected, you can play music from your phone or tablet.
2. Adjust the volume from either the Master unit or the Bluetooth device.
   • Bonus: You have full control over both speakers. You can lower the volume on one speaker while the other plays, or adjust the sound between the two.

Step 7: Advanced Connections (Optional)

If you need to connect the BT Link to devices with RCA or XLR inputs:

1. Use the 3.5mm to RCA cable to connect the BT Link to devices with RCA inputs (such as TVs or home theater systems).
2. For XLR connections, use the 3.5mm to male XLR cable.

Step 8: Additional Features

• Each BT Link unit comes with a built-in microphone and multifunction button to answer, redial, hang up, or reject calls.
• The units feature a digital sound processor for enhanced sound quality, with a frequency response of 20Hz to 20kHz, ensuring there’s no signal degradation.

Conclusion

The Rockville BT Link AUX to Bluetooth Adapters are a versatile and simple solution for connecting your Bluetooth device to speakers that don’t have built-in Bluetooth. By pairing two speakers wirelessly, you can enjoy true stereo sound without the need for complicated wiring. Whether you're at home, hosting an event, or setting up a multi-room audio system, the BT Link will provide a seamless connection for an enhanced listening experience.