ROCKBOOTH TRUSS: How To Attach & Change Scrims

Introduction:

Attaching scrims to your Rock Booth Truss is a simple and effective way to enhance your DJ setup. You have two options for scrims: white and black. This guide will walk you through the steps for attaching both, depending on the effect you want to create. Whether you're illuminating the facade with the white scrim or projecting light onto the facade with the black scrim, you’ll have everything set up in no time.

Step-by-Step Instructions:

1. Preparing the Scrim

• Choose Your Scrim:

  You have two scrim options: a white one for illuminating your booth with lights, and a black one for projecting light onto the facade. We’ll be using the white scrim for this setup.

• Position the Facade:

  Start by opening up your facade.

2. Attaching the Scrim

• Align the Scrim:

  Place the scrim over the top of the facade, ensuring it’s flipped the right way. Make sure the top of the scrim completely covers the top of the facade.

• Secure the Corners:

  Take the corners of the scrim and line them up with the inner corners of the facade. Then, wrap the corners around the facade and secure them with the Velcro.

• Pull Down the Slack:

  Make sure to pull the slack of the scrim down and ensure it’s properly aligned with the inner corners of the facade for a smooth finish.

• Secure the Bottom:

  Line up the bottom corners of the scrim with the bottom corners of the facade. You may need to lift the booth slightly to allow the scrim to fit properly around the bottom. Secure the Velcro to hold everything in place.

3. Adding the Second Table

• Attach the Second Table:

  If you want to add a second table, align the hooks on the table with the holes at the top of the facade. Push it down to make sure it’s secure.

• Wire Management:

  You can use the holes on each table to run wires through, ensuring a clean and tidy setup, especially if you’re using any DJ or sound equipment.

4. Alternate Scrim Option (Black Scrim)

• Black Scrim Setup:

  If you want to use the black scrim instead of the white one, simply follow the same steps above, replacing the white scrim with the black one.

Conclusion:

Attaching the scrims to your Rock Booth Truss is a quick process that makes a big difference in the appearance and functionality of your setup. Whether you choose the white or black scrim, you’ll create an impressive and professional-looking booth.