ROCKBOOTH TRUSS: How To Assemble & Pack

Introduction:

Setting up your Rock Booth Truss is a breeze with this step-by-step guide. From assembling the facade and DJ table to securely mounting your lights, we’ll walk you through everything. We’ll also show you how to pack everything back into the carrying bags for easy transport, making your next gig or event setup simple and efficient.

Step-by-Step Instructions:

1. Setting Up the Facade

• Remove Velcro Strips:

  Begin by removing the Velcro strips that keep the facade secure during transport.

• Adjust Feet for Uneven Surfaces:

  Adjust the feet of the facade by twisting them to the left to raise them, or to the right to lower them, ensuring the facade is even on your surface.

• Flip and Unfold the Facade:

  Flip the facade over and stretch it out, adjusting the feet if needed to ensure it’s level.

2. Attaching the DJ Table

• Loosen the Screws:

  Unscrew the screws on the facade where the DJ table will attach.

• Attach the DJ Table:

  Line up the hooks on the DJ table with the holes in the facade and ensure the hooks catch the frame of the facade.

• Screw the DJ Table In Place:

  Insert the screws back into the holes to secure the DJ table to the facade.

3. Mounting the Truss Poles

• Attach Side Poles:

  Take the two poles with rubber feet and align the hooks with the square holes on the facade. Insert the black bolts from the outside and screw them in place using the black screw knobs.

• Secure the Center Pole:

  Join the two center poles and use a silver bolt and wing nut to secure them together. Attach the center pole to the side poles by loosening the knobs, aligning the openings, and tightening the knobs to secure everything.

4. Raise the Truss

• Loosen the Knobs on Side Poles:

  Loosen the side knobs to raise the truss.

• Use Safety Pins to Lock in Height:

  As you raise the truss, use the safety pins to secure the height at your desired level and then tighten the knobs to lock everything in place.

5. Attaching the Scrim

• Attach the Scrim:

  Depending on your setup, attach either the white or black scrim. For the white scrim, pull the corners tight, wrap them around the facade, and secure with Velcro.

6. Adding Lights

• Light Placement Using C-Clamps:

  Attach lights such as the Rockwedge LED to the truss using C-clamps. Choose the desired spot and secure the light by screwing the clamp into place.

• Mounting Lights Using Pre-Drilled Holes:

  Use the bolts and wing nuts included with your truss to mount lights to the pre-drilled holes. Tighten the bolts with a screwdriver to secure the lights.

7. Packing the Rock Booth Truss

• Disassemble the Truss:

  When it’s time to pack up, start by removing the truss poles. Use the Velcro straps inside the smaller bag to keep the poles secure.

• Pack the Hardware:

  Place the mounting hardware and screws in the smaller bag and zip it up.

• Pack the Facade and Tables:

  Place the facade and tables into the larger bag. Make sure everything fits snugly for easy transport.

• Combine Handles for Easy Carrying:

  Use the Velcro padding on the larger bag to combine the handles for a more comfortable grip.

Conclusion:

With these simple steps, you’ll be able to set up and pack your Rock Booth Truss quickly and easily. Whether you’re lighting your booth for a big event or just storing it for the next gig, this guide ensures that everything will stay organized and ready to go.