RWM1203VH: How To Set Up & Use

Introduction

The Rockville RWM1203VH is a dual wireless VHF microphone system designed for DJs, live performances, conference events, houses of worship, and karaoke. This guide will walk you through setting up the system, connecting it to a powered speaker or mixer, and exploring different usage setups.

Step 1: Unboxing and Initial Setup

Inside the package, you’ll find:

• Two wireless microphones
• AA batteries for the microphones
• RWM1203VH receiver unit
• Quarter-inch cable for speaker connection
• Power adapter (pre-attached to the receiver)

Installing Batteries in the Microphones

1. Unscrew the bottom of each microphone to access the battery compartment.
2. Insert one AA battery per microphone, ensuring the negative (-) side is aligned with the spring.
3. Reattach the battery cover by sliding it back on and twisting to secure it.
4. Turn on each microphone using the power switch.
   • The LED display will light up, showing Channel 1 (orange) or Channel 2 (blue).

Step 2: Setting Up the Receiver Unit

1. Plug in the receiver unit using the attached power adapter.
2. Turn on the receiver using the front-panel power switch.
   • The blue LED display will illuminate.
3. Extend the two rear antennas to improve the wireless signal.
   • Each antenna corresponds to one microphone.

Step 3: Connecting the Microphone Receiver to a Powered Speaker

Using a Quarter-Inch (1/4”) Cable

1. Take the included quarter-inch cable.
2. Plug one end into the "Mix Output" on the receiver.
3. Plug the other end into the microphone input on your powered speaker.
4. Ensure the speaker’s mic input is in "MIC" mode (push the button if necessary).
5. Turn on the speaker and slowly raise the microphone volume on the receiver.
6. Test your microphone—your voice should now be heard through the speaker.

Step 4: Connecting the Microphone Receiver to a Mixer

For a larger audio setup, you can connect the receiver to a powered mixer with passive speakers.

Using an XLR Cable

1. Take an XLR cable.
2. Plug the female end into the "Balanced XLR Output" on the receiver.
3. Plug the male end into an available microphone channel on the mixer.
4. Turn on the powered mixer and increase the gain for that channel.
5. Raise the fader and unmute the channel.
6. Turn on the microphone and adjust the levels as needed.

Tip: With a mixer setup, you can use additional EQ, reverb, and effects to enhance microphone performance.

Step 5: Popular Usage Scenarios

1. Karaoke Setup (Bluetooth + Microphones)

• Connect a smartphone or tablet to the powered speaker via Bluetooth.
• Play a karaoke track from YouTube.
• Use the wireless microphones for singing.
• Enjoy a complete karaoke system with no extra wires!

2. PA System for Public Speaking

• Use the quarter-inch cable to connect the receiver to a PA speaker.
• Use the wireless mics for speeches, announcements, or sermons.
• Enjoy freedom of movement with the 150-ft wireless range.

3. Large Audio System (Mixer + Multiple Speakers)

• Connect the receiver to a mixer using an XLR cable.
• Use the mixer to control microphone EQ and volume levels.
• Send the audio signal to multiple speakers for large event coverage.

Conclusion

The Rockville RWM1203VH Dual Wireless Microphone System is a versatile and easy-to-use solution for live sound, karaoke, public speaking, and more. Whether you connect it directly to a powered speaker or integrate it into a mixer setup, you’ll enjoy crystal-clear sound and wireless freedom.