SINGMIX 5 V2: How To Connect A TV Using Optical Connection

Introduction

This guide will walk you through connecting your Rockville SingMix 5 V2 Amplifier and Receiver to a smart TV for enhanced sound output. Whether you’re using the amplifier for home theater, karaoke, or music playback, this setup will allow you to hear your TV audio through your SingMix 5 V2 and connected speakers.

What You’ll Need:

• Rockville SingMix 5 V2 Amplifier
• Smart TV with an optical (Toslink) or coaxial output
• Optical cable (or coaxial cable if using the coax input)
• Speakers connected to the amplifier

Step 1: Check Your TV’s Audio Output

1. Look for an optical or coaxial output on the back of your smart TV.
2. Verify that the output is active by checking the TV settings.
   • If the TV has an optical output, it should be labeled “Audio Out Optical” or similar.
   • If using a coaxial output, it will be labeled “Coaxial Out” or “Digital Audio Out”.

Step 2: Connecting Your TV to the Amplifier

Option 1: Optical Connection (Recommended)

1. Plug one end of an optical (Toslink) cable into the TV’s optical output.
2. Check for the red light at the other end of the cable, indicating an active signal.
3. Remove the protective cap from the cable and plug it into the Optical input on the back of the SingMix 5 V2.

Option 2: Coaxial Connection (Alternative)

1. Plug one end of a coaxial audio cable into the TV’s coaxial output.
2. Plug the other end into the Coax input on the amplifier.

Step 3: Adjusting TV Audio Settings

Once the cable is connected, adjust the TV’s audio settings to ensure sound is routed to the amplifier:

1. Go to your TV’s Audio Settings in the menu.
2. Change the audio output to “Optical” or “Coaxial” (whichever you are using).
3. For Optical connections, set the audio format to PCM (Pulse Code Modulation).
   • PCM ensures a stereo signal, which is compatible with the amplifier.
4. Increase the TV’s volume to maximum for optimal output.

Step 4: Setting the Amplifier Input Mode

1. Turn on the Rockville SingMix 5 V2.
2. Press the Optical or Coax button on the front panel to match your connection:
   • If using optical, press the button until “Optical” appears on the display.
   • If using coaxial, press the button until “Coax” appears on the display.
3. Increase the master volume on the amplifier.

Step 5: Test the Sound

1. Play a video or TV show to check if audio is coming through the amplifier and speakers.
2. If no sound is heard, double-check:
   • TV audio settings are set to Optical (PCM) or Coaxial.
   • The correct input mode is selected on the amplifier.
   • The volume is turned up on both the TV and amplifier.

Bonus: Using the TV for Karaoke

Once connected, you can use the TV as a karaoke setup by playing karaoke tracks on YouTube:

1. Open the YouTube app on your Smart TV.
2. Search for karaoke versions of your favorite songs.
3. Connect microphones to the SingMix 5 V2 and adjust mic volume.
4. Sing along while the lyrics appear on the screen, and the audio plays through the amplifier and speakers!

Conclusion

You’ve successfully connected your Rockville SingMix 5 V2 to your Smart TV! Now you can enjoy enhanced audio for movies, shows, music, and karaoke. Try adjusting different sound settings on your amplifier to get the best listening experience.