RPM47: How To Set Up Karaoke

Introduction

This guide explains how to set up karaoke easily using your Rockville RPM47 mixer, a microphone, and a tablet. Even if you're new to audio setups, these clear and simple steps will quickly get your karaoke party up and running.

Requirements:

• Rockville RPM47 Mixer
• Dynamic microphone (or condenser microphone)
• XLR microphone cable
• Tablet or smartphone (for music and lyrics)
• Speakers (connected to the mixer)

Step-by-Step Instructions

Step 1: Connecting Your Microphone

1. Plug your XLR cable into your dynamic microphone:
   • Connect the female end of the XLR cable into your microphone.
   • Connect the male end into the XLR mic input on channel 1 of your RPM47.
2. Adjust volume levels:
   • Turn up the Level knob for channel 1.
   • Raise the Master knob to control overall volume output.
3. Test your microphone:
   • Speak into your mic to verify audio is coming from the speakers.

Note: You can add up to four more microphones following these same exact steps using channels 2 through 5.

Connecting a Tablet for Karaoke Playback

Step 1: Connect Your Tablet via Bluetooth

1. On your tablet, activate Bluetooth and pair it with the RPM47 mixer.
   • Select "Rockville RPM47" from your device’s Bluetooth pairing list.
2. Raise the MP3 volume knob on the mixer to ensure your music will play through your speakers.
3. Now any audio played from your tablet (e.g., YouTube karaoke tracks) will be audible through your connected speakers.

Using Karaoke Lyrics and Music

• Open your favorite karaoke app or YouTube on your tablet.
• Select the song you want to perform and display the lyrics on your tablet screen.

Setting Up Multiple Microphones

• The RPM47 has five channels for microphones or instruments.
• To connect additional microphones, repeat the above steps for each new mic.

Adding Effects to Enhance Your Karaoke Performance

• Your RPM47 mixer has built-in audio effects to enrich your karaoke sound:
  1. Locate and use the built-in effects section.
  2. Adjust effect knobs (such as reverb or echo) to your preferred level.

Troubleshooting & FAQs

Q: Why isn’t my tablet connecting via Bluetooth?

• A: Ensure your device is in pairing mode and within range. Check your Bluetooth settings to ensure the mixer appears as discoverable.

Q: My microphone isn't loud enough.

• A: Raise the Level knob for your microphone channel and ensure the Master knob is turned up adequately.

Q: Can I connect instruments along with microphones?

• A: Yes, the RPM47 has line inputs for guitars, keyboards, and more. Follow the same connection method with a ¼" cable.

Conclusion

You've successfully set up karaoke on your Rockville RPM47 mixer! Enjoy performing with clear audio and simple control over your music and vocals.